Porting the upper intake manif
#1
Porting the upper intake manif
When I read the article In a mustang magazine about porting the upper intake manifold I new it would be a modification I would eventually get cause its cheap effective and gives more power, and since then ive seen them on ebay. However Im the kinda person that likes to save money and do all the things I can do to my car myself and not pay a mechanic who I dont know or trust to mess with my car so how hard is it to port and polish the manifold, and if I had a dremel rotory tool and alot of spare time could I do it myself. Are there any websites you could recomend me to. Thanks
#2
Porting the upper intake manif
yes you could..one thing to remember more is not better on a near stock engine...every thing of have the intake extrude hone..it's not cheap but you will see the hp gains..or you can port match,but the heads on the intake side would need to be ported as well the see any real gains
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM