VT/CMS Stage II Cams ....nice gains....
#23
My tune was complete and utter garbage though, espcially down low. I probably would have had equal/better TQ than before with a decent a/f ratio before 4000 RPM, as it was I was seeing like 15.5:1 at 2500
edit: With those kinds of gains, what are the estimates before/after if it was on a dynojet? 40 WHP is nuts for just cams on a stock head/intake car, it must be a great cam and tune.
Last edited by 2000GT4.6; 10-11-2008 at 09:32 AM.
#25
At the time it was BBK Lts, BBK o/r X, and a magnaflow catback.
My tune was complete and utter garbage though, espcially down low. I probably would have had equal/better TQ than before with a decent a/f ratio before 4000 RPM, as it was I was seeing like 15.5:1 at 2500
edit: With those kinds of gains, what are the estimates before/after if it was on a dynojet? 40 WHP is nuts for just cams on a stock head/intake car, it must be a great cam and tune.
My tune was complete and utter garbage though, espcially down low. I probably would have had equal/better TQ than before with a decent a/f ratio before 4000 RPM, as it was I was seeing like 15.5:1 at 2500
edit: With those kinds of gains, what are the estimates before/after if it was on a dynojet? 40 WHP is nuts for just cams on a stock head/intake car, it must be a great cam and tune.
I would sure look into your tune ...something is not right.
#27
My Dynojet numbers before were 262/299 so I would expect to see ~300/315 after the cams. A 40 rwhp gain is on the high side, but not unheard of from these cams. I went with these cams not for the dyno numbers I've seen, but because I think they are un-matched in track performance. There are other cams making similiar numbers on the dyno but I've not seen them relate to the track. The Hi-Tech Stage II cams come to mind. Lots of impressive dyno numbers but I have yet to see them backed up on the track.
I would sure look into your tune ...something is not right.
I would sure look into your tune ...something is not right.
Must be a great cam and great tune. I am interested to see how your track numbers improve.
#28
Very nice gains! You should see nice improvements at the track now!
I would also like to see some track #'s for the Hi-Tech cams. Anybody?
I went with these cams not for the dyno numbers I've seen, but because I think they are un-matched in track performance. There are other cams making similiar numbers on the dyno but I've not seen them relate to the track. The Hi-Tech Stage II cams come to mind. Lots of impressive dyno numbers but I have yet to see them backed up on the track.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
09-25-2015 09:06 AM