Rubnswrd

Hello Guys,

First let me say this is my first time on a Forum so I apologize if I do something incorrect. I've searched through other threads and haven't found something quite like my issue.

2 weeks ago I received a CEL Code of:

P2004 - Intake Manifold Runner Control Stuck Open (Bank 1)
P2005 - Intake Manifold Runner Control Stuck Open (Bank 2)

When that happened the car became very sluggish and it did not matter how much I pushed the gas it had no power and it started making a ticking noise.

I then Purchased the Steeda Delete Plugs, had them installed, and had the car tuned. Now the car drives normal again but that ticking noise is still there. (See Link Below) There are no CEL on the Car.

Any suggestions

Dino Dino Bambino

Sounds like worn cam phasers.

Rubnswrd

Thank you, I'll have that checked out on Wednesday and update this with the results.

BlindGUYnAR

Cam phasers. Common issue