88blackCONvert

Ok, im finna do a 5 lug conversion (well, when i save up enough for the bullits and tires) and got a couple of questions:

1: Will the bolt pattern will be the same on the SVO rotors as the ranger rear axles?

2: Will the bullit center cap fit with the SVO rotors (the sticky mentions that the caps wont fit because of the dust cap, but i don't know if it ment the lincoln rotors, or the svo ones)

3: The sticky also mentions i'll be limited on wheel selection to 97' and older cobras. Is this the SVO rotors or just the lincolns?

88blackCONvert

no one has any helpful info for me . Im getting ready to leave outa town for a while, but when i get back you guys had better answered my questions [sm=badbadbad.gif]

















Just kiddin or was I?? hehe anyway, help a cracker out fellas

primetime5.0

your centers will not fit, either get 95 brakes or run a spacer.... your choice... the svo rotors and lincoln ones are exactly the same thing, they have the same part number

88blackCONvert

Thanx for the info Primetime!

2 kwik

hope your adding the svo calipers as wel

SPE926

i've got two sets of svo rotors and calipers, let me know if you want a set