Radiator HELP
#1
Radiator HELP
ok, I have a 90' mustang, and there is multiple-small-coolant leaks scattered underneath the car after I drive it.... I know its not a gasket
NOW, i did replace the entire engine along with a heater core, but didn't replace its hoses... and there is steam coming from that side... but no coolant...after i shut it off
I think the radiator is leaking and the stock fan is throwing coolant all around the engine.... which radiator do u think is best?
http://www.latemodelrestoration.com/...0%201&comp=LRS
http://www.latemodelrestoration.com/...0%201&comp=LRS
NOW, i did replace the entire engine along with a heater core, but didn't replace its hoses... and there is steam coming from that side... but no coolant...after i shut it off
I think the radiator is leaking and the stock fan is throwing coolant all around the engine.... which radiator do u think is best?
http://www.latemodelrestoration.com/...0%201&comp=LRS
http://www.latemodelrestoration.com/...0%201&comp=LRS
#2
RE: Radiator HELP
http://store.summitracing.com/partde...p;autoview=sku
Billet filler neck and 2 1" cores (compared to the 3/4" cores on the 50 resto peice)
I'm ordering mine tomorrow. If you've got a few days to wait, I can let ya know how it looks when it gets here.
Billet filler neck and 2 1" cores (compared to the 3/4" cores on the 50 resto peice)
I'm ordering mine tomorrow. If you've got a few days to wait, I can let ya know how it looks when it gets here.
#3
RE: Radiator HELP
if ur spending that kind of money then get a fluidyne radiator...
I'm saving up for cosmetics and a new rear.... so I'm thinking I could get away with that aluminum w/ plastic tanks.... I'm only producing btwn 350-400hp
I'm saving up for cosmetics and a new rear.... so I'm thinking I could get away with that aluminum w/ plastic tanks.... I'm only producing btwn 350-400hp
#4
RE: Radiator HELP
ORIGINAL: cholericfc
if ur spending that kind of money then get a fluidyne radiator...
if ur spending that kind of money then get a fluidyne radiator...
I'm saving up for cosmetics and a new rear.... so I'm thinking I could get away with that aluminum w/ plastic tanks.... I'm only producing btwn 350-400hp
So... whatever you do, get something with steel tanks of one form or another.
Thread
Thread Starter
Forum
Replies
Last Post
stangin1996gt
4.6L (1996-2004 Modular) Mustang
0
09-21-2015 11:01 AM