When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
stock length is 6.250, you need one adjustable from 6-7 ish range, no if ands or buts length must be measured, and what had you done???
I put a flat tappet cam and lifters in, it wasn't a roller block or anything, but the cam i got changed the firing order, an it threw my computer into wack, making it run all messed up
so you have a flat tappet block??? there are very few flat tappet cams available with the h.o firing order
Yeah i heard there are some, but i can't find any. So now i have to pull it all a part, well not really just the front an top, and make it all roller now.
Yeah i heard there are some, but i can't find any. So now i have to pull it all a part, well not really just the front an top, and make it all roller now.
to make it roller, there are two options...option 1 expensive 450.00 link bar retro fit lifters and roller cam.......option 2 reduced base circle cam and stock roller lifters and hardware and tap valley for spyder retainer, if interested in option 2 I have retro fit cam = comp thumpr cam .530/.515 lift but with the cam it still reccommends the retro expensive lifter = these http://www.summitracing.com/parts/CCA-8931-16/
anyway I have cam and springs...175.00 for both if interested