need some info on my h/c/i
#1
need some info on my h/c/i
have a 92 hatch with a 306....h-beam rods, flat top pistons, b series cam, 1.7 roller rockers, 70mm throttle body, 75mm mass air, and was told it had a eagle 306 crank but dont even know if they exist. i am buying some trick flow heads and intake tomm and i heard some stuff about tf heads eating valve guides and i seen that improper pushrod length causes that....wondering if anybody can tell me how to measure for what size i need or if anybody can tell me what size i need??
#3
I read about those as well when I bought my TF head 2 months ago. From what I understand it was an early problem that they have now fixed. Not sure how old your is but when I found them new at summit for $1k I jumped on them. Just need to find a sale on some rockers, pushrods and a cam
#4
be very careful about PTV clearance running flat top pistons and twisted wedge heads. do your pistons have larger valve releafs in them?
and which series heads and intake? that will help us better determine your cam choice. also do you plan on any kind of power adder?
and which series heads and intake? that will help us better determine your cam choice. also do you plan on any kind of power adder?
#5
i have the 170 heads-part no.tfs-51400004 and the intake is the track heat part no. tfs-515b0002. the guy i bought it off of said my best bet would be a custom ground cam but if he was gonna buy a cam he would go with the trick flow stage one
Thread
Thread Starter
Forum
Replies
Last Post
folivier
Tennessee Regional Chapter
4
10-02-2015 05:32 AM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM