Engine Project
#1
Engine Project
I am starting my first engine project and building a Mild 5.0 for my 65 mustang. I would like so input on parts so I know if I am on the right track and what kind of power to expect.
I will be using a 5.0 from a Explorer with Gt40 heads. I would like to run a B303 Cam and 1.6 roller rockers. I was also considering an Underdrive Pulley set. I plan to use long tube headers as well. If I can I would like to use my edelbrock manifold and carb from my current 302.
Please give some input any advice is much appreciated because I would like to try and get this right the first time.
I will be using a 5.0 from a Explorer with Gt40 heads. I would like to run a B303 Cam and 1.6 roller rockers. I was also considering an Underdrive Pulley set. I plan to use long tube headers as well. If I can I would like to use my edelbrock manifold and carb from my current 302.
Please give some input any advice is much appreciated because I would like to try and get this right the first time.
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM