5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

5.0 won't run

Thread Tools
 
Search this Thread
 
Old 08-16-2012, 10:40 PM
  #1  
indianajim
Thread Starter
 
indianajim's Avatar
 
Join Date: Aug 2012
Location: Indiana
Posts: 6
Default 5.0 won't run

I have a 5.0 HO that won't stay running and is stumping me.

This engine stopped running over a year ago and sat the whole time.


Recently we brought it up to top-dead-center and got everything firing fine. It was then running fine for about a week. I put gas treatment and filed it with new high octane gas. Then the motor just started running bad and eventually stopped starting completely.

I tried a new(different) computer, changed the fuel filter, and we have spark.

We checked fuel pressure from the tank (filter area) and at the engine area - Good but possibly not enough pressure?


It has spark and will momentarily start using starting fluid at the intake but that's it.

Our only thought is that it is in the fuel delivery. Any ideas to check?

Any help would be great.

Thanks,
Jim
indianajim is offline  
Old 08-17-2012, 01:27 AM
  #2  
rydinturbo
2nd Gear Member
 
rydinturbo's Avatar
 
Join Date: Feb 2006
Location: boston
Posts: 310
Default

what was the fuel pressure? how do the plugs look? check for codes, vaccum leaks ect. does it just crank over
rydinturbo is offline  
Old 08-17-2012, 09:08 PM
  #3  
indianajim
Thread Starter
 
indianajim's Avatar
 
Join Date: Aug 2012
Location: Indiana
Posts: 6
Default

Plugs and wires are new as is the rotor/cap.
It does just crank over.
We'll need to check fuel pressure with a gauge. We only looked for fuel movement visually.

Thanks
indianajim is offline  
Old 08-18-2012, 11:29 AM
  #4  
Duncan_GT
4th Gear Member
 
Duncan_GT's Avatar
 
Join Date: Jun 2011
Location: Indy
Posts: 1,353
Default

It sounds like fuel pressure. Although I'm not sure why it would lose pressure over a week's period
Duncan_GT is offline  
Old 08-19-2012, 03:06 PM
  #5  
Bubba 95SN
4th Gear Member
 
Bubba 95SN's Avatar
 
Join Date: Apr 2009
Location: N.C.
Posts: 1,893
Default

Put gauge on fuel rail, post results.....
Bubba 95SN is offline  
Old 08-19-2012, 06:56 PM
  #6  
2011scgt
1st Gear Member
 
2011scgt's Avatar
 
Join Date: Aug 2012
Location: va
Posts: 135
Default

these pumps can just take a dump with no warning
2011scgt is offline  
Old 08-23-2012, 09:01 PM
  #7  
indianajim
Thread Starter
 
indianajim's Avatar
 
Join Date: Aug 2012
Location: Indiana
Posts: 6
Default

Just to let you know, no codes came up when checked. That was the real stumper as to why it isn't running.

I'll soon try the fuel pressure with a gauge.
indianajim is offline  
Old 08-24-2012, 01:57 PM
  #8  
87 T TOP GT302
2nd Gear Member
 
87 T TOP GT302's Avatar
 
Join Date: Mar 2008
Location: Mt. Airy, North Carolina
Posts: 164
Default

Just a thought but have you checked you fuel lines?
87 T TOP GT302 is offline  
Old 09-15-2012, 04:33 PM
  #9  
indianajim
Thread Starter
 
indianajim's Avatar
 
Join Date: Aug 2012
Location: Indiana
Posts: 6
Default Still not running

Finally got back to the fuel test and there is ample pressure (38lbs). Also replaced the fuel regulator with no changes.

Just a follow-up. It was running for a while and started to sputter and bog down. After parking it, it never started again.

Checked the codes and none show. Checked vacume lines - no problem.

Still completely stumped. Any ideas would be greatly appreciated.

Thanks.
indianajim is offline  
Old 09-20-2012, 08:58 PM
  #10  
indianajim
Thread Starter
 
indianajim's Avatar
 
Join Date: Aug 2012
Location: Indiana
Posts: 6
Default Fuel injectors?

I was told by someone that it may be the fuel injectors.

Any thoughts?

Thanks
indianajim is offline  


Quick Reply: 5.0 won't run



All times are GMT -5. The time now is 05:33 PM.