5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
Sponsored by Weld Racing
Welcome to Mustang Forums!
Welcome to Mustang Forums.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Yea you can , as long as they will thread in the holes. On mine the little stubby one that is in your pic is plugged off. I use the other ones. I don't know how your car is set up but , you need vacuum to the fuel pressure regulater the brake booster the pcv and the tree on the firewall that feeds every thing else like the heater controls and evap stuff and egr stuff.
Rmodel65 is correct though if you havnt bought the cobra intake yet then consider a gt40 from an explorer , they are almost identical in flow and are usually much cheaper, unless your getting a great deal on the cobra intake, or your going for looks.
i could buy the cobra upper for $200 and a lower explorer from a junkyard for $25. or $50 for upper and lower explorer. but if i get the cobra that does not require a egr spacer for my new throttle body so im saving 50 there. then the other 150 is just to have the cool cobra look.
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor