OK, got everything hooked up & it works!!! Thanks for the help
I bought the test light & used it on the metal tabs in the socket to determine which wire was which!!!
Passenger side has a green/white, brown, & black wire----the green/white is the blinker, brown is the parking light & black is ground
Drivers side has a blue/white, brown, & black wire--- the blue/white wire is the blinker, brown in parking light & black is ground
So I used scotch locks to connect the 6 ohm load resistor......connect the green/white to one end & the black to the other end of the load resistor (Passenger side)
Connect the blue/white and the black wires to the load resistor (Drivers side) Make sure the connections are good & your finished.
THIS IS ON A 95 MUSTANG GT VERT
Here is a link to my photos http://s1174.photobucket.com/user/eg...?sort=3&page=1