5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Starting from Scratch....

Thread Tools
 
Search this Thread
 
Old 02-06-2004, 04:48 PM
  #1  
SBS88GT
Thread Starter
 
SBS88GT's Avatar
 
Join Date: Feb 2004
Location: United States
Posts: 14
Default Starting from Scratch....



I have a 88 GT that is basically bone stock. The exhaust from the cats back is the only small mod to the car. My question is were should I start for more power? I'm on a limited budget so I can't start dumping thousands right away.Mass air, headers, rear????? Please help.</P>


</P>


Thank's</P>


Sean</P>
SBS88GT is offline  
Old 02-06-2004, 05:26 PM
  #2  
619socalstang
3rd Gear Member
 
619socalstang's Avatar
 
Join Date: Jan 2004
Location:
Posts: 850
Default Starting from Scratch....

you need a good amount of money to get started around $1500.00 but can do smaller stuff. i would go CAM under 200,HEADERS under 300,and ROUSE steelHEADS under 600, larger MAF under 300 and TB under 300. you can do all that for under 1500 and your car will scream but add another 1000 and get better heads and upper and lower intake. rouse heads are very good flowing just not ALUM. so people dont like but on a budget there excelent. and a set or 410s would be good<edited><editID>619socalstang</editID><editDate>38023.6442939815</editDate></edited>
619socalstang is offline  
Old 02-06-2004, 05:36 PM
  #3  
mkspeed26
5th Gear Member
 
mkspeed26's Avatar
 
Join Date: Dec 2003
Location: Rochester, NY
Posts: 2,392
Default Starting from Scratch....

o/r x-pipe and headers are a good start. if you can get $2100 you can buy a trick flow package which gets 360 hp!! and that is n/a and it is always there!!
mkspeed26 is offline  
Old 02-06-2004, 05:40 PM
  #4  
vfast
I ♥ Acer
 
vfast's Avatar
 
Join Date: Jul 2003
Location:
Posts: 11,394
Default Starting from Scratch....

man I think the guys is on a low budget

k/n filter...used
pulleys.......used
3:73 gears150 or go used 200 install
flowmaster mufflers90.00 pair new
used h-pipe60-75 used
73mm c/l 50-75 used
4 cyl springs 30.00 used
battery relocated in the trunk45.00
drag radials 250 new
syth oil.....25
so for 900 or so looking at knocking .5-.9 sec off the clock not bad huh?<edited><editID>vfast</editID><editDate>38023.6544444444</editDate></edited>
vfast is offline  
Old 02-06-2004, 05:47 PM
  #5  
mkspeed26
5th Gear Member
 
mkspeed26's Avatar
 
Join Date: Dec 2003
Location: Rochester, NY
Posts: 2,392
Default Starting from Scratch....

then he should save up for it <IMG src=smileys/smiley2.gif border="0">
mkspeed26 is offline  
Old 02-06-2004, 05:58 PM
  #6  
SBS88GT
Thread Starter
 
SBS88GT's Avatar
 
Join Date: Feb 2004
Location: United States
Posts: 14
Default Starting from Scratch....

I have about 1500. The thing is don't work on my car for I have a fear of screwing it up. So as we all know...1500 won't do me much.
SBS88GT is offline  
Old 02-06-2004, 06:07 PM
  #7  
mkspeed26
5th Gear Member
 
mkspeed26's Avatar
 
Join Date: Dec 2003
Location: Rochester, NY
Posts: 2,392
Default Starting from Scratch....

then gears, o/r x-pipe and shorties, intake manifold, k&amp;n filter, new mass air meter, a CAI, what tranny do you have??
mkspeed26 is offline  
Old 02-06-2004, 06:14 PM
  #8  
vfast
I ♥ Acer
 
vfast's Avatar
 
Join Date: Jul 2003
Location:
Posts: 11,394
Default Starting from Scratch....

mk..easy said you know young guys with a new car they want to do mod today..I can't blame them

sbs..those mods will make it faster and are easy bolt ons except the gears but those would be the first thing to add
vfast is offline  
Old 02-06-2004, 06:19 PM
  #9  
mkspeed26
5th Gear Member
 
mkspeed26's Avatar
 
Join Date: Dec 2003
Location: Rochester, NY
Posts: 2,392
Default Starting from Scratch....

yea, i know. i will be one of those in a few months when i get mine. but i also know exactly what i want to do to it already, so i will have the mods right when i get the car. *L*.
mkspeed26 is offline  
Old 02-06-2004, 06:23 PM
  #10  
vfast
I ♥ Acer
 
vfast's Avatar
 
Join Date: Jul 2003
Location:
Posts: 11,394
Default Starting from Scratch....

mods right?*L*..mine I'm added to it all the time...what I posted will get the job done til heads and stuff can be bought...that car will leave prety good......... the intake wouldn't be on my first mod list or CAI or shorties
vfast is offline  


Quick Reply: Starting from Scratch....



All times are GMT -5. The time now is 11:37 PM.