I currently have an AOD and purchased a used T5. Iplan onswapping the AOD for the T5, car is stock w/ a few bolt ons.Not a track car.

What parts do I need to complete the swap other than bellhousing, pedal assy., clutch, shifter?

Has anyone done this, any pointers or tips?

Thanks in advance!

 

clutch, pressure plate, flywheel, cable, firewall adapter. one tip get centerforce dfx clutch otherwise your going to wish you had your auto

 

speedo gear on tranny side and flywheel. It is a, easy swap if you are a halfway capable mechanic. remove the steering wheel though, it will save you a kinked neck, and if you are bigger than about5'8' and 175 then you should prolly remove the seat for ease of install.

 

before you slide the pedal assembly in put in aaluminum clutch quadrant, i just spent 2hrs pulling the pos plastic crappy ratchet piece of crap because it stripped and wound up with no clutch. save yourself the hassle.

 

Thanks for the advice guys, yea I'm 6'1" 250lbs. so I'll needs some space!

Anyone else have any tips or advice to help the install go smoothly?

[8D]

 

hmm well when you wanna take off the old pedal assembly just drop down the stering columb you dont have to open the whole dash i learned that the hard way [:@]and yeah like some people say go with an aluminum quadrent you cant go wrong with that they sell kits on ebay ooooh and also dont forget to changed the rear main seal one last thing ones you get the new flywheel on the crank you have to spin it around a couple of times soo that the bolt patern lines up "it goes on a certain way" also learned that the hard way [:@]

heres a link hope you have fun if you need some more pointers get at me i did this not to long ago

http://westcoastmustangs.com/article...ap/t5swap.html

 

hah i was waiting for someone to post the link!

Good luck!!!

 

Thanks fellas [sm=gears.gif]