It's been a while since i have gone to the track...best i had done before with my m/t drag radials was a 12.97 @ 112 with a 100 shot of nitrous

i installed the summit lower and upper control arms and did some work on the carb and setup, the car now revs up to 7,000 rpms but power starts to drop after 6,500 rpms so shift light was set up at 6,400 rpm.

with some et drag the car did 1.69 60ft and 12.96 @ 104.7...for all out there that have thought about buying the summit kit...buy it! oh and this was on a N/A run...nitrous runs with 125 shot coming soon

here is a vid of my car that day
http://videos.streetfire.net/video/J...470_211036.htm

and heres one of my car at the dyno
http://videos.streetfire.net/video/1...yno_193465.htm

 

nice runs ..wrong section though

 

nice.What's all done to it

 

B-303 cam
original e7 heads ported, polished, cut .040
crane 1.7 roller rockers
1 5/8 long tube headers with cherry bomb resonators (no h, no mufflers)
Edelbrock Performer RPM intake, holley 650 cfm double pump carb
MSD 6AL, Billet Dizzy, and coil
Ford 9mm Wires
Sniper 125 shot nitrous setup


Thats what it said in the details on the dyno vid.

 

nice videos. please tell all of your modifications

 

Nice vids...+1 ^^^ whats the mods?

 

B-303 cam
original e7 heads ported, polished, cut .040
crane 1.7 roller rockers w/ crane double valve springs
1 5/8 long tube headers with cherry bomb resonators (no h, no mufflers)
Edelbrock Performer RPM intake, holley 650 cfm double pump carb
MSD 6AL, Billet Dizzy, and coil
Ford 9mm Wires
Sniper 125 shot nitrous setup
summit racing control arms,
3.73 diff,
electric fan
no a/c

thats about it!

 

good job. nice runs. car looks slick as well with the black wheels. mine used to have those same wheels, and if im not mistaked, are those Nexen N2000 tires on the front? if so then we had the same setup, lol. but anyway keep it up man!

 

Work on the tree and get a stiffer sway bar in the rear. Congrats on 12s.

 

Very nice job Joey!!! :-)