My fox @ the track...new numbers + vid
#1
My fox @ the track...new numbers + vid
It's been a while since i have gone to the track...best i had done before with my m/t drag radials was a 12.97 @ 112 with a 100 shot of nitrous
i installed the summit lower and upper control arms and did some work on the carb and setup, the car now revs up to 7,000 rpms but power starts to drop after 6,500 rpms so shift light was set up at 6,400 rpm.
with some et drag the car did 1.69 60ft and 12.96 @ 104.7...for all out there that have thought about buying the summit kit...buy it! oh and this was on a N/A run...nitrous runs with 125 shot coming soon
here is a vid of my car that day
http://videos.streetfire.net/video/J...470_211036.htm
and heres one of my car at the dyno
http://videos.streetfire.net/video/1...yno_193465.htm
i installed the summit lower and upper control arms and did some work on the carb and setup, the car now revs up to 7,000 rpms but power starts to drop after 6,500 rpms so shift light was set up at 6,400 rpm.
with some et drag the car did 1.69 60ft and 12.96 @ 104.7...for all out there that have thought about buying the summit kit...buy it! oh and this was on a N/A run...nitrous runs with 125 shot coming soon
here is a vid of my car that day
http://videos.streetfire.net/video/J...470_211036.htm
and heres one of my car at the dyno
http://videos.streetfire.net/video/1...yno_193465.htm
#4
B-303 cam
original e7 heads ported, polished, cut .040
crane 1.7 roller rockers
1 5/8 long tube headers with cherry bomb resonators (no h, no mufflers)
Edelbrock Performer RPM intake, holley 650 cfm double pump carb
MSD 6AL, Billet Dizzy, and coil
Ford 9mm Wires
Sniper 125 shot nitrous setup
Thats what it said in the details on the dyno vid.
original e7 heads ported, polished, cut .040
crane 1.7 roller rockers
1 5/8 long tube headers with cherry bomb resonators (no h, no mufflers)
Edelbrock Performer RPM intake, holley 650 cfm double pump carb
MSD 6AL, Billet Dizzy, and coil
Ford 9mm Wires
Sniper 125 shot nitrous setup
Thats what it said in the details on the dyno vid.
#7
B-303 cam
original e7 heads ported, polished, cut .040
crane 1.7 roller rockers w/ crane double valve springs
1 5/8 long tube headers with cherry bomb resonators (no h, no mufflers)
Edelbrock Performer RPM intake, holley 650 cfm double pump carb
MSD 6AL, Billet Dizzy, and coil
Ford 9mm Wires
Sniper 125 shot nitrous setup
summit racing control arms,
3.73 diff,
electric fan
no a/c
thats about it!
original e7 heads ported, polished, cut .040
crane 1.7 roller rockers w/ crane double valve springs
1 5/8 long tube headers with cherry bomb resonators (no h, no mufflers)
Edelbrock Performer RPM intake, holley 650 cfm double pump carb
MSD 6AL, Billet Dizzy, and coil
Ford 9mm Wires
Sniper 125 shot nitrous setup
summit racing control arms,
3.73 diff,
electric fan
no a/c
thats about it!
Last edited by joeymustang; 01-12-2009 at 11:41 AM.
#8
good job. nice runs. car looks slick as well with the black wheels. mine used to have those same wheels, and if im not mistaked, are those Nexen N2000 tires on the front? if so then we had the same setup, lol. but anyway keep it up man!