MustangForums.com - View Single Post

JJ_Stang · 11-01-2005, 09:02 PM

1. Open the armrest and remove the 2 screws all the way towards the rear of the car.
2. Unscrew the shift knob
3. Remove the whole unit be careful getting the piece around the emergency brake I think their are 4 body clips
4. you now need to pull out the 2 side pieces, where your knee rests wile driving, they should just pop right out
5. Their are 6 9/32nd screws holding the climate control unit once the unit is free you can pull it out a little and then disconnect all the cables from the back of all the controls, one of them has a grey lever that you have to push and then pull. The lighter is also a pin to disconnect
6. then their are 4 9/32nd screws that hold the radio, their are 3 connectors in the back + the antenna. Putting the Shifter in reverse gives you a little more clearance.

Hope this helps I knew I should of took some pics.

11-01-2005, 09:02 PM	#4
JJ_Stang 2nd Gear Member Join Date: Sep 2005 Location: Stamford, CT Posts: 354	RE: Shaker 500 Removal 1. Open the armrest and remove the 2 screws all the way towards the rear of the car. 2. Unscrew the shift knob 3. Remove the whole unit be careful getting the piece around the emergency brake I think their are 4 body clips 4. you now need to pull out the 2 side pieces, where your knee rests wile driving, they should just pop right out 5. Their are 6 9/32nd screws holding the climate control unit once the unit is free you can pull it out a little and then disconnect all the cables from the back of all the controls, one of them has a grey lever that you have to push and then pull. The lighter is also a pin to disconnect 6. then their are 4 9/32nd screws that hold the radio, their are 3 connectors in the back + the antenna. Putting the Shifter in reverse gives you a little more clearance. Hope this helps I knew I should of took some pics. __________________