2013 Taillight-style on my 2006 Mustang! (Plasti Dip)
#1
2013 Taillight-style on my 2006 Mustang! (Plasti Dip)
You've probably seen me before on a thread with the plasti dipped decklid. I've been very creative again with Plasti Dip and the result was better than i expected!
I taped off my whole taillight with painters tape, made a sketch of what i wanted. Teared it off in 1 piece. Scanned it into photoshop. Made the edge a bit round like the 2013 lights. Printed it. Duplex taped the back of the printed page. Cut out the outter and inner ring with a scissor. Sticked it on the taillight and sprayed 11 layers of Dip on it.
You can do it yourself too! Just save the image of the left taillight, mirror it and print it on original size.
Here it is:
I taped off my whole taillight with painters tape, made a sketch of what i wanted. Teared it off in 1 piece. Scanned it into photoshop. Made the edge a bit round like the 2013 lights. Printed it. Duplex taped the back of the printed page. Cut out the outter and inner ring with a scissor. Sticked it on the taillight and sprayed 11 layers of Dip on it.
You can do it yourself too! Just save the image of the left taillight, mirror it and print it on original size.
Here it is:
Last edited by Rams; 10-03-2012 at 10:11 AM.
#7
haha nice! I did this to my left light a few weeks back just playing around. No doubt about it, it is an awesome look at night. Mine looked kind of retarded in the day time though (probably because my car is gloss black next to the flat black dip). MOAR PICS?!