View Single Post
Old 07-08-2013, 11:31 AM   #7
fastbackford351
Foghorn Leghorn
 
fastbackford351's Avatar
 
Join Date: Dec 2006
Vehicle: 1967 Fastback & 2002 GT Convertible
Location: Florida
Posts: 1,899
Default

JamesW hooked me up with a solution when I was trying to figure out the linkage on my '67.

Dig...

Using a 1/4" threaded rod with heim joints on each end connect the accelerator pedal to the carburetor. I used allen head screws with rubber washers and lock nuts to secure it in place. To pretty it up use a piece of brake line to slide over & camouflage the threaded rod. Taa-daa.

It looks great, is slicker than hell and butter smooth.

Total cost was about 10.00.


Yeah...Jordan linked to it

http://www.fordmuscle.com/archives/2...kage/index.php
__________________
Government Warning:

Governments are extremely dangerous.
Death, imprisonment, theft of property
and loss of freedom will result from
giving them too much power.

Last edited by fastbackford351; 07-08-2013 at 11:34 AM.
fastbackford351 is offline   Reply With Quote