View Single Post
Old 06-16-2014, 04:51 PM   #10
EGULL
 
Join Date: Nov 2013
Vehicle: 95 FORD MUSTANG GT
Location: ILLINOIS
Posts: 40
Default

OK, got everything hooked up & it works!!! Thanks for the help

I bought the test light & used it on the metal tabs in the socket to determine which wire was which!!!

Passenger side has a green/white, brown, & black wire----the green/white is the blinker, brown is the parking light & black is ground

Drivers side has a blue/white, brown, & black wire--- the blue/white wire is the blinker, brown in parking light & black is ground

So I used scotch locks to connect the 6 ohm load resistor......connect the green/white to one end & the black to the other end of the load resistor (Passenger side)

Connect the blue/white and the black wires to the load resistor (Drivers side) Make sure the connections are good & your finished.

THIS IS ON A 95 MUSTANG GT VERT

Here is a link to my photos http://s1174.photobucket.com/user/eg...?sort=3&page=1
EGULL is offline   Reply With Quote