Official Build/Rebuild Thread of my 69FB
#101
Been awhile since I did an update. They have not done the sheetmetal order yet for my firewall and decklid but I have been by to talk to them about it. i did get new speakers and a new head unit for the car though.
Went with a 6 3/4 for the front and a 6 1/2 for the rear so I can have some good sound WHEN I want to hear music instead of the engine.
I went with a Pioneer head unit since this one had 3-4V pre-outs.
I hope that after I get our taxes done I can use some of the return on the car.
Went with a 6 3/4 for the front and a 6 1/2 for the rear so I can have some good sound WHEN I want to hear music instead of the engine.
I went with a Pioneer head unit since this one had 3-4V pre-outs.
I hope that after I get our taxes done I can use some of the return on the car.
#102
this is where it had sat for around ten years
69FB been reading your thread your doing a great job , don't worry about the purchase price I paid 12,500 for my 70 mach1 about a year ago without even hearing it run it had been sitting for about ten years friends said I was crazy but about 4,000 later and she's on the road again with no problems so far. keep up the good work
#104
Well finally have some updates on my build thread. Been trying to get a decklid for my mustang for 4 years and it's been back ordered every time. Finally got one through Scott Drake.
Replacing it because the old decklid had a spoiler on it (when they sold it to me as a Mach 1) and it was rusted.
I posted 3 pictures because it took so long to get one and it looks so much better. The passenger quarter panel was replaced and when it was welded in the gap is a little tight so going to have to beat on it a bit to make it work.
Replacing it because the old decklid had a spoiler on it (when they sold it to me as a Mach 1) and it was rusted.
I posted 3 pictures because it took so long to get one and it looks so much better. The passenger quarter panel was replaced and when it was welded in the gap is a little tight so going to have to beat on it a bit to make it work.
#105
Also got the firewall in so we can start cutting out the old and get all the sheetmetal back together. Still need to get a new gas tank (also had rust in it).
Once this is welded in have a few more rust holes to fix and then it's Dynamat time. Will have to start getting the interior back together then.
Once this is welded in have a few more rust holes to fix and then it's Dynamat time. Will have to start getting the interior back together then.
#107
True but I could not find one that was not rusted and I have faith in my mechanic on his bodywork skills it making it right. He is also a perfectionist and will work at it till it is perfect.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM