65 striker door shim
#1
65 striker door shim
Hi. We just recently replaced the door striker on our 65 fastback, and now we are starting to have trouble shutting the door again. A few guys looked at it and say we need a shim on the striker. Anyone know where to get these? I found one for a 67-70, would it fit? Thanks
#3
hello;
i have not seen new ones separately, only with a new latch. you can get used ones from the link below or from any old ford in the junk yard.
http://www.mustang-village.com/
you do not need longer screws.
you can just use washers for now if you don't slam the door.
.
.
i have not seen new ones separately, only with a new latch. you can get used ones from the link below or from any old ford in the junk yard.
http://www.mustang-village.com/
you do not need longer screws.
you can just use washers for now if you don't slam the door.
.
.
Thread
Thread Starter
Forum
Replies
Last Post
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
MustangForums Editor
General Tech
0
09-25-2015 06:58 PM