A lot of GT500 new take off parts.
01-20-2011, 10:13 AM
#1
Former Sponsor
Thread Starter
Join Date: Nov 2009
Location: Georgia
Posts: 243
A lot of GT500 new take off parts.
We have quite a few parts from a GT500 that was heavily modified. All parts have approximately 100 miles on them, everything is in new condition. I'll post pictures below, along with prices, and if you have any questions let me know. Feel free to PM me an offer on any one or combination of more than one item.
Wheel and tire package. This is the factory wheels, tires and tire pressure system(works for 07-09 cars). The tires are the 255/45/18 and 285/40/18 Goodyear Eagle F1 Supercar tires. $1000.
Sway bar set with brackets/bushings shown in pictures. $150
Panhard bar. $25
Strut Tower Brace. $50
Wheel and tire package. This is the factory wheels, tires and tire pressure system(works for 07-09 cars). The tires are the 255/45/18 and 285/40/18 Goodyear Eagle F1 Supercar tires. $1000.
Sway bar set with brackets/bushings shown in pictures. $150
Panhard bar. $25
Strut Tower Brace. $50
01-20-2011, 10:24 AM
#2
Former Sponsor
Thread Starter
Join Date: Nov 2009
Location: Georgia
Posts: 243
Suspension system. Includes struts, shocks and springs. $200. Picture was deleted, I'll upload one this afternoon.
Cat back exhaust system. Includes clamps shown. 3" polished and slash cut tips. $150.
Radiator. These things aren't cheap and I don't know what the value is. I am going to put $300 as the price tag. but make an offer.
Driveshaft with u-joint and center bracket. This is the stock 2 piece shaft. $50.
Stock T56 shifter and linkage. No bar or **** included. $20.
Cat back exhaust system. Includes clamps shown. 3" polished and slash cut tips. $150.
Radiator. These things aren't cheap and I don't know what the value is. I am going to put $300 as the price tag. but make an offer.
Driveshaft with u-joint and center bracket. This is the stock 2 piece shaft. $50.
Stock T56 shifter and linkage. No bar or **** included. $20.
01-20-2011, 11:23 AM
#3
Former Sponsor
Thread Starter
Join Date: Nov 2009
Location: Georgia
Posts: 243
Supercharger. $500.
Intake assembly. Includes filter and clamps. $200.
Heat exchanger. $250.
Throttle body with spacer/elbow. $200.
Intake assembly. Includes filter and clamps. $200.
Heat exchanger. $250.
Throttle body with spacer/elbow. $200.
Last edited by CruizinConceptsJohn; 01-20-2011 at 11:30 AM.
01-20-2011, 11:53 AM
#4
Former Sponsor
Thread Starter
Join Date: Nov 2009
Location: Georgia
Posts: 243
One thing that I can do is include everything from the air box to the charger in one package. This will be the intake system w/filter, throttle body, spacer, charger, heat exchanger, idler pulley and I'll toss the thermostat and original OEM plugs in as well. Everything you see in this picture will be included. $1000.
Also, there are the stock coolant tanks. These would work well for a busted replacement or a custom install. $20 or I'll include them with the complete charger system above.
I've also got some of the factory GT500 emblems including the S H E L B Y trunk lettering and some badges. There is a miscellaneous box of bolts I will post later on.
Also, there are the stock coolant tanks. These would work well for a busted replacement or a custom install. $20 or I'll include them with the complete charger system above.
I've also got some of the factory GT500 emblems including the S H E L B Y trunk lettering and some badges. There is a miscellaneous box of bolts I will post later on.
01-29-2011, 09:58 AM
#5
Join Date: Sep 2010
Location: PA
Posts: 25
Hey do you still have the sway bars and strut brace? Pm me or feel free to shoot me and email at stevehambone33@yahoo.com
Thread
Thread Starter
Forum
Replies
Last Post
1994, 2004, 2009, 2010, 2011, 500, gt, gt500, mustang, newtakeoff, newtakeoffparts, parts, suspension, takeoff, wheels
