TKO600 GREAT CONDITION
#1
TKO600 GREAT CONDITION
Selling my tko600 with fresh rebuild (when i got the trans 1,2,3 gear syncros were shot)
The rebuild (have the reciept) cost $800 and has about 4000 miles on it. Trans shifts great! For the reverse, trans needs to be shifted into 1st gear then put into reverse... i talked to the shop that did the rebuild and they said this was normal for the trans. Other then that everything is in great working order
Reason for selling: putting a modular engine in the fox, backed by a auto trans, so need ot get rid of this!
Asking price $1700! looking for local buyers but will help arrange for shipping if need be!
Also as seen in photos, i have a Ram power grip clutch (still has life left in it), SFI approved forged steel flywheel, and a SFI approved blow proof bell housing!!!!!!!!
The rebuild (have the reciept) cost $800 and has about 4000 miles on it. Trans shifts great! For the reverse, trans needs to be shifted into 1st gear then put into reverse... i talked to the shop that did the rebuild and they said this was normal for the trans. Other then that everything is in great working order
Reason for selling: putting a modular engine in the fox, backed by a auto trans, so need ot get rid of this!
Asking price $1700! looking for local buyers but will help arrange for shipping if need be!
Also as seen in photos, i have a Ram power grip clutch (still has life left in it), SFI approved forged steel flywheel, and a SFI approved blow proof bell housing!!!!!!!!
#2
trans
What else is need to complete the swap? Does the shifter locate in the stock location or is it farther back in the floor hole? Drive shaft shorten? Speedo cable the same? Can the T-5 clutch work? Need a new yoke for the tail?
#3
i actually have every single piece you would need to complete the swap, the TKO has a different spline count on inputand output shaft so the stock yoke on the driveshaft wont work, and the clutch is different/flywhel. IT locates in the same exact spot as the T-5 would, I have the bellhousing, flywheel, clutch, aluminum driveshaft with correct yoke(if you just want the yoke i can take it off and ship that, crossmember, fork, thro out bearing, pedal assembaly, clutch cable, have upr shift arm and hurst white que ball shift **** with axillary button for nitrous, 2 step, line lock, or what everesle you might find ituseful for
#5
Thread
Thread Starter
Forum
Replies
Last Post
yourmom6990
Archive - Parts For Sale
2
09-14-2015 10:52 PM