Private or Dealer Listing: Private Listing
Location (State/Prov): NJ
This is a project car with a clean title. The shell was originally a 4cyl car, in great shape. The car has manual windows, and comes with manual mirrors(not installed) and can easily be converted to manual locks, this all saves weight. The engine bay was professionally smoothed (welded every hole and then painted). This is a solid car, no rust underneath. The exterior needs new paint, front/rear bumpers and fenders are primed and ready for paint. Interior(grey) is completely disassembled but all there. The seats are from an 89 lx v8 car so they are the grey tweed with taller head rest, they are pretty worn out. I do not have a front suspension or steering column. I will consider trades and separating parts if the price is right. If you don't see what you need just email or text.
The car will need to be picked up on a trailer, and it only has wheels for the rear(2 pony wheels). There is no front suspension(k-memeber ect) so it will need to be loaded like a wheelbarrow. I will help load it, and if you don't live too far, I can help unload it.
This list is only the parts I can think of at the moment, but if you email me I can confirm if I have anything else.
Parts from the 5.0 donor car
-gauge cluster(not the 80mph like in 4cly)
- front and back brakes(fronts not installed)
-steering wheel with tilt(not installed)
-mass air wiring harness and sensor(not installed)
-Mac exhaust(cat back)
-Aluminum driveshaft(ford racing)
-T5 5-speed, rebuilt with 500miles
New parts(most are not installed)
-351w(0 balanced) stroked to 408(94' block for rollers)
all forged internals with probe pistons cut for trick flow TW heads(one cyl. has a scratch but finger nail doesn't catch, should be alright) its been sitting for a while so it may have some flash rust.
-351w swap oil pan(normal cap.)
-moroso electric water pump
-comp timing chain set
-trickflow fast-as-cast 190cc with a custom bowl blend
-custom ground cam for whole setup
-comp hydrolic roller lifters
-flaming river manual steering rack, also have the adj. shaft and a bump steer kit
-Maximum Motorsports caster camber plates
-Energy Suspension motor mounts(used)
-New Weather stripping in the original box
-Interior screw kit
-Megasquirts 2 ecu for running fuel injections on a ford and tuning with laptop
-0 Balanced fly wheel
I will update the list when I remember what else I have for it.
I'm looking to get $3000 for everything but I will entertain trades + cash(no electronics).
****I no longer have the K-member, coilovers with struts, and steering column with wheel.