05-09 Eibach Front and Rear Sway Bars

04-22-2011, 11:21 AM

#1

6605stang

3rd Gear Member

Thread Starter

Join Date: Feb 2006

Location: Littleton, CO

Posts: 600

05-09 Eibach Front and Rear Sway Bars

Category: Steering & Suspension
Price: $150
Private or Vendor Listing: Private Listing
Part fits: S197
Location (State/Prov): CO
Item Condition: Brand New

Have a set of new, never installed Eibach Front and Rear Sway bars. Part number 35115.320. They have never been mounted up, but have a couple of very insignificant blemishes, just from being shipped once or twice and laying around. Pristine bolt holes prove they are new. I do NOT however have any of the mounting hardware, front or rear. BUT Summit does sell the entire front and rear hardware kits and the parts numbers are as follows if you'd like to look them up to price it out.

Front - 35101.310HK
Rear - 35115.312HK

From what I priced out at Summit, hardware kits are going to run you about $138 shipped. I'll sell the bars alone for $150 shipped anywhere in the lower 48 states and you'll have a new Eibach sway bar kit for $288 versus $420 + S&H from Summit Racing.

EDIT: Okay, this sale fell through once already, but for no good reason. There is the deal, if you look up this part number (35115.320) it will say for the GT500, HOWEVER, that is simply because this is a thicker bar that was developed by Eibach FOR the GT500 Super Snake. If you buy the mounting hardware I listed above which is FOR these sway bars, they will mount up to the exact same place as other sway bars on the S197's, only be thicker and hence better. If you try and use these bars with stock mounting hardware, of course it will not work. But AGAIN, if you buy the correct mounting hardware listed about, this WILL WORK FOR ALL S197 Mustangs. Confirmed BY Eibach and 2 other major Mustang Parts Vendors that sponsor this site.

PM with any questions. Cheers, JR

Last edited by 6605stang; 04-22-2011 at 03:39 PM.