PURGE PROBLEM
#1
PURGE PROBLEM
i have a nitrous soleniod that only has in and out ports on it. now i know that nx brand has a port underneath. so that is self explanatory, but with mine its a edelbrock solenoid, i dont know how to make it purge, any help is appreciated
#2
RE: PURGE PROBLEM
if its not a purge soleniod that u cant use it as a purge because n e other solenoid has constantly running nos threw it the hole time but a purge solenoid blocks the nitrouse until u press a swicth then it will open up
#3
RE: PURGE PROBLEM
Its a nitrous soelnoid, i was wanting to know if it was possible to still be able to plug a purge solenoid up to it even though it only has a in and out port and not the extra 3rd one.
#5
RE: PURGE PROBLEM
You can use the solinoid you have, just T into it like this. Purge solinoids are just small nitrous solinoids.
The line on the left with the blue fitting is the main line from the bottle, it goes into the T fitting, then you will need a short peice of line to go from the other side of the T to your n2o solinoid. Run another line from the outlet side of the purge solinoid to where ever you want the purge to come out.
[IMG]local://upfiles/7038/9E5E0B92384B427EB3DE69570A65CB42.jpg[/IMG]
[IMG]local://upfiles/7038/A177142037014BF2A6AC6D432599E56B.jpg[/IMG]
The line on the left with the blue fitting is the main line from the bottle, it goes into the T fitting, then you will need a short peice of line to go from the other side of the T to your n2o solinoid. Run another line from the outlet side of the purge solinoid to where ever you want the purge to come out.
[IMG]local://upfiles/7038/9E5E0B92384B427EB3DE69570A65CB42.jpg[/IMG]
[IMG]local://upfiles/7038/A177142037014BF2A6AC6D432599E56B.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
stangin1996gt
4.6L (1996-2004 Modular) Mustang
0
09-21-2015 11:01 AM