Traction issues at strip!!
#22
Im running the fixed length upr control arms,but have the double adjustables on the way..Maybe its in my pinion angle,but I just dont see it making that much difference..On the spring rate, I did have 12inch 175rate springs and my car would bottom out on the street..Went with the 250 spring and it fixed my ride problem..
#23
I talked to him before..I went through hell trying to figure it out..I changed caster/camber plates,struts,ball joints..It didnt help so I called and they recommended trying that spring rate..It fixed the problem so no complaint there..but that 12 175 spring is what my tuner recommended for street/strip..
#24
Well I ran a little better last night..I removed my front sway bar..Still spinning really bad in first gear though..I ran 7.66 at 99.4 mph with a 1.79 60 ft...Hope to get my double adjustable uppers on..Then maybe call upr and order a different front coilover spring more drag strip friendly..I let a good friend of mine drive the car last night..He said the front end is way to stiff and is not tranfering weight very good...
#26
Well I ran a little better last night..I removed my front sway bar..Still spinning really bad in first gear though..I ran 7.66 at 99.4 mph with a 1.79 60 ft...Hope to get my double adjustable uppers on..Then maybe call upr and order a different front coilover spring more drag strip friendly..I let a good friend of mine drive the car last night..He said the front end is way to stiff and is not tranfering weight very good...
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM