GT exhaust system swap
#2
You will need to modify the midpipe to match up to the v6 midpipe as the GT one is wider. After that the tailpipes are a direct fit. You will also need the two bumper hangers and passenger side hanger for the tailpipes.
#3
Basically you need to buy the GT adapter kit from american muscle or have a shop custom fab a mid pipe, but from the axle back it's the same. Well, you will need an exhaust hanger kit for the passenger side, but that's it.
#4
Any midpipe specifically for a V6 will work with a GT catback. You just need hangers
let me rephrase this:
If you're getting rid of your cats then any midpipe for a V6 will work with a GT catback, and you just need hangers. If you're not getting rid of your catbacks I'm pretty sure you need an adapter. They sell it on AM
let me rephrase this:
If you're getting rid of your cats then any midpipe for a V6 will work with a GT catback, and you just need hangers. If you're not getting rid of your catbacks I'm pretty sure you need an adapter. They sell it on AM
Last edited by MCR; 03-02-2015 at 04:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM