V6 (1994-2004) Mustangs Technical discussions on the 3.8L and 3.9L V6 torque monsters

misfire issue

Thread Tools
 
Search this Thread
 
Old 01-31-2017, 03:04 PM
  #1  
ksmith4225
Thread Starter
 
ksmith4225's Avatar
 
Join Date: Jan 2017
Location: pa
Posts: 3
Default misfire issue

i have a 01 3.8 tang car runs great until i shut it off say for 5-10 mins i go back in to start it and it feels like its running on 3 cylinders. plugs wire coil pack replaced. fuel pressure is good compression is great. no cel no codes cleaned all the senors from tps to iac to mass sensor n still has a mis after its been hot then turned off for 10 mins. any ideas would be great thanks
ksmith4225 is offline  
Old 02-01-2017, 02:25 PM
  #2  
ksmith4225
Thread Starter
 
ksmith4225's Avatar
 
Join Date: Jan 2017
Location: pa
Posts: 3
Default

thanks for all the info guys this site sucks ***. im helping a friend n u people cant help thank god i dont own a ****ty rustang
ksmith4225 is offline  
Old 02-03-2017, 01:04 AM
  #3  
Daehawk
4th Gear Member
 
Daehawk's Avatar
 
Join Date: Mar 2010
Location: TN
Posts: 1,626
Default

Its a very low use board and this area is pretty dead. At least you waited 2 whole days before proving you're an ***.
Daehawk is offline  




All times are GMT -5. The time now is 10:45 PM.