Pre-Painted Antenna Cover
11-11-2008, 02:51 PM
#11
Join Date: Aug 2008
Location: Fort Lauderdale, FL
Posts: 49
yeah...i didnt realize we were talking about different things until after my initial post. i already have a different antenna wired up, so i dont have the stock stick type antenna. i want the base gone and the hole covered, i just cant bring myself to spend like $200 on it....
11-11-2008, 03:14 PM
#12
2nd Gear Member
Thread Starter
Join Date: Oct 2008
Location: Hughestown, PA
Posts: 342
yeah...i didnt realize we were talking about different things until after my initial post. i already have a different antenna wired up, so i dont have the stock stick type antenna. i want the base gone and the hole covered, i just cant bring myself to spend like $200 on it....
but I hate the base, I know I can stripe it down and get the bodyshop to paint it for me but I figured if someone did make one it would most likely be cheaper....
11-11-2008, 07:24 PM
#13
2nd Gear Member
Join Date: Jul 2008
Location: Fort Lauderdale
Posts: 374
I mainly do custom one off work dealing with fiberglass and/or abs plastic, depending on the size and complexity.
I quoted Andrew $59 + S&H for the concept sketching, 3-D Computer Model, and Primer Only finished ABS part. Takes about 1-2 weeks for the whole process, probably less depending on how fast we communicate. But in terms of reproducing them, it would most likely be around $25 + S&H for a part like that. Ultimately Andrew would be the one with the final say on the overall design of the product.
sample portfolio at www.coroflot.com/Fbiancuzzo
I quoted Andrew $59 + S&H for the concept sketching, 3-D Computer Model, and Primer Only finished ABS part. Takes about 1-2 weeks for the whole process, probably less depending on how fast we communicate. But in terms of reproducing them, it would most likely be around $25 + S&H for a part like that. Ultimately Andrew would be the one with the final say on the overall design of the product.
sample portfolio at www.coroflot.com/Fbiancuzzo
Last edited by Cuzzo; 11-11-2008 at 07:27 PM. Reason: added text
11-12-2008, 10:06 AM
#15
2nd Gear Member
Thread Starter
Join Date: Oct 2008
Location: Hughestown, PA
Posts: 342
Just to FYI everyone.... RPI Designs got back to me stating that they have an interest and wanting more information about what I'm looking for.
Cuzzo - I'd be interested in seeing your hand drawn sketches whilst I wait for more info from RPI....
Cuzzo - I'd be interested in seeing your hand drawn sketches whilst I wait for more info from RPI....
11-12-2008, 11:42 AM
#16
2nd Gear Member
Join Date: Jul 2008
Location: Fort Lauderdale
Posts: 374
Andrew I'll send you the ideation sketches via email, or to this post later tonight. (preferably to the email until the project is complete).
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
0
10-01-2015 08:58 AM
Boostaddict
3.7L V6 S550 Tech 2015 - 2017
0
10-01-2015 08:57 AM
