Which shorty antenna?
07-08-2010, 12:55 AM
#13
2nd Gear Member
Join Date: Nov 2009
Location: AZ
Posts: 465
This is the 14" antenna from AM. I prefer this one over the 8"
Another one to consider is sold by CJ Pony.
http://www.cjponyparts.com/product.asp?pn=ANT14
Another one to consider is sold by CJ Pony.
http://www.cjponyparts.com/product.asp?pn=ANT14
07-08-2010, 02:48 AM
#14
5th Gear Member
Thread Starter
Join Date: Apr 2010
Location: California
Posts: 2,016
This is the 14" antenna from AM. I prefer this one over the 8"
Another one to consider is sold by CJ Pony.
http://www.cjponyparts.com/product.asp?pn=ANT14
Another one to consider is sold by CJ Pony.
http://www.cjponyparts.com/product.asp?pn=ANT14
07-08-2010, 07:07 AM
#15
6th Gear Member
I have 14" ers on both Stangs. IMO, the 8" looks a bit odd. Also, there was a minor loss in reception in rural areas on FM going from the the buggy whip to the 14" although I, too, listen to satellite about 99% of the time. I'd expect additional loss with the 8". But if you're not traveling more than 50-75 miles out-of-town on a frequent basis, it won't make much if any difference in reception.
07-08-2010, 09:43 AM
#16
3rd Gear Member
Join Date: Dec 2006
Location: Colorado
Posts: 944
I agree - just grab a hacksaw and cut your antenna down. I cut mine to 13". I didn't bother removing and trying to reinstall the ball top. I went to the local hobby store and bought some of the rubber antenna tips used for radio control cars and planes - I think I paid $0.50 for 5 of them.
07-08-2010, 03:20 PM
#17
5th Gear Member
Thread Starter
Join Date: Apr 2010
Location: California
Posts: 2,016
I have 14" ers on both Stangs. IMO, the 8" looks a bit odd. Also, there was a minor loss in reception in rural areas on FM going from the the buggy whip to the 14" although I, too, listen to satellite about 99% of the time. I'd expect additional loss with the 8". But if you're not traveling more than 50-75 miles out-of-town on a frequent basis, it won't make much if any difference in reception.
07-08-2010, 06:48 PM
#18
4th Gear Member
Join Date: Mar 2007
Location: Portland, OR
Posts: 1,747
When I traded my 05 I stripped all my parts off, including the 8" from AM. When I took it out, the threads were rusted all to hell. The 5 year old stocker looked brand new, and the 7 month old 8" looked BAD.
Starting to lose faith in some of AM's products, at least the lower end appearance stuff. I had two magnetic blackout panels from AM and both of them bubbled badly. I realize that stuff is not high dollar parts, but come on.
Starting to lose faith in some of AM's products, at least the lower end appearance stuff. I had two magnetic blackout panels from AM and both of them bubbled badly. I realize that stuff is not high dollar parts, but come on.
