2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.

First Dyno with Kenne Bell

Thread Tools
 
Search this Thread
 
Old Mar 30, 2006 | 02:36 AM
  #1  
sidmanic's Avatar
sidmanic
Thread Starter
2nd Gear Member
 
Joined: Mar 2006
Posts: 326
From: Las Vegas, NV
Default First Dyno with Kenne Bell

Have to say that I am very pleased with my first set of numbers, auto tranny, 20" wheels and all.
423hp and 399Tor

There was a little jump in the middle of the run because my tires kept breaking traction on the dyno. Not enough tread and too much torque with 4.10 gears. Whats cool is that this was just with the 8psi pulley and the standard Power tune. I figure shes good for a few more with some race gas, my 10psi pulley and the Shootout race tune. Should have some new timeslips come late Friday night. Haven't even ran my slicks yet.
Old Mar 30, 2006 | 04:53 AM
  #2  
silverpoison's Avatar
silverpoison
2nd Gear Member
 
Joined: Jan 2006
Posts: 453
From: Bellflower, CA
Default RE: First Dyno with Kenne Bell

WELCOME TO THE KENNE BELL CLUB
Old Mar 30, 2006 | 07:25 AM
  #3  
W1ldcat's Avatar
W1ldcat
3rd Gear Member
 
Joined: Mar 2006
Posts: 763
From:
Default RE: First Dyno with Kenne Bell

I bet that sounds awesome...
Old Mar 30, 2006 | 09:44 AM
  #4  
jbailer's Avatar
jbailer
3rd Gear Member
 
Joined: Nov 2005
Posts: 701
From:
Default RE: First Dyno with Kenne Bell

sidmanic, is yours an 05 or 06? Great numbers! I am still patiently waiting for the arrival of my KB. -Joe
Old Mar 30, 2006 | 10:06 AM
  #5  
angcobra's Avatar
angcobra
4th Gear Member
 
Joined: Nov 2004
Posts: 1,724
From:
Default RE: First Dyno with Kenne Bell

nice numbers, but I am not sure about that blip in the middle, if you notice the line actualy goes back to the left a little which is not possible because that would mean going back in time. I would say the blip was computer/dyno not slipping tires.
Old Mar 30, 2006 | 10:24 AM
  #6  
hawgman's Avatar
hawgman
I ♥ Acer
 
Joined: Feb 2005
Posts: 3,225
From: Texas
Default RE: First Dyno with Kenne Bell

Congratulations man. Looks good.
Old Mar 30, 2006 | 08:56 PM
  #7  
sidmanic's Avatar
sidmanic
Thread Starter
2nd Gear Member
 
Joined: Mar 2006
Posts: 326
From: Las Vegas, NV
Default RE: First Dyno with Kenne Bell

Mines an 05. Had to go down and put a new set of tires on the girl because I could spin the tires doing 55mph down the freeway. Sounds cool but when you get sideways at that speed with a couple of cars next to you, it gets your attention in a bad way. I'm running 20's so I went with the BF Goodrich KDW's, 255/35 front, 265/35 back. I would like to go bigger but the style that I wanted doesn't come in a 275, only the traditional tread and even then, it would have been sporty squeezing those on my 8.5" wide wheels. These seem to be doing the trick.
Old Mar 30, 2006 | 10:45 PM
  #8  
jbailer's Avatar
jbailer
3rd Gear Member
 
Joined: Nov 2005
Posts: 701
From:
Default RE: First Dyno with Kenne Bell

That explains it. I have a KB sc on order for my automatic 06 and I've been waiting forever. I heard they were just finishing with the application the end of this week. I have the BF Goodrich KDW2s and went with the same for the front but 285/30/20 for the back. Those are just for street driving. For track days my baby has a new pair of shoes! -Joe
Old Mar 31, 2006 | 03:32 PM
  #9  
Birdieman4's Avatar
Birdieman4
5th Gear Member
 
Joined: Oct 2003
Posts: 3,020
From:
Default RE: First Dyno with Kenne Bell

If you are pushing 8 psi, I'm surprised that your #'s weren't higher. What was your a/f ratio under load, and what is your total timing set at?
Old Mar 31, 2006 | 03:52 PM
  #10  
lostsoul's Avatar
lostsoul
4th Gear Member
 
Joined: Feb 2005
Posts: 1,370
From: bay area
Default RE: First Dyno with Kenne Bell

agreed.. not to bat down anyones sc, but couldnt you get that or better from the saleen at 8psi? and for much cheaper. I have the procharger and would have gotten the saleen but I got mine at a good deal.



All times are GMT -5. The time now is 08:36 AM.