chevykiller

On Saturday, June 3 - ST Motorsports in San Bernardino is having a dyno day and Barbecue for mustangs from 9:00 am till 7:00 pm. You get 3 pulls with a/f and a meal ticket for $45.00!

Great deal and would be great for a lot of us so cal members to meet up in person. I'll be there with the beer and hope to see some of you. You can PM me for more details.

Mark

Sleeper05

im thinkin this is calling me to road trip back down from sactown. what kind of dyno? i've been wanting to know how i stack up on a dynojet

chevykiller

It's a dyno jet.

chevykiller

Is anyone planning on going? There won't be bench racing but there will be benches...

TinPony

I'll be there, I hope there isnt a long wait from 9am. I have to work at 11A (as usual)

SPARTAN VI

Is this the address?

346 S I St # 8
San Bernardino, CA 92410

I'd like to go. 3 pulls for $45 and food sounds like fun to me. Maybe I'll bring my paps. I've been wondering what my C&L intake, tune, and exhaust has done for me.

MSgt46270

His address is 380 S I st, his web site hasn't been updated.
As far as your tune you should have had Adam retune it. On the 25th of this month I have an appoitment to get the 10 pulley installed and retune. He told me that he'll get me up around 430hp, currently I'm at 354hp. I do have an auto trans and the motor is still stock except for the Saleen S/C.

chevykiller

^^^^ This is correct - it's a big new building. Adam is one of the foremost SRT specialist also so there will be a lot of SRT's there as well. For all you who think they are slow - you'll be surprised to see how fast some of these so cal srt's are.

Come and find out how your mustang stacks up against them...

MSGT - I'm sure we'll get you in 1st since you have to leave early. I'm looking forward to seeing your car again. I enjoyed the ride last time.


Mark

SPARTAN VI

Oh lordy... I have to take the 10-E fwy to get there.. Mapquest says 43 minute drive, but Mapquest doesn't know the 10 fwy.

Chevy.. I might go. But you guys have to promise that if anyone starts bashing V6 mustangs that you'll kick em in the head... [:@]

MSgt46270

I won't be making that day. I'm going on the 25th to have a 8 or 10lb pulley installed and retune. I'll get my dyno run in then. When I talked to Adam, he said he'll get me up around 430hp at the wheels (ATW). Currently I'm at 354hp ATW with 350 tq.
We'll have to get together some time after I get my pulley installed. Maybe you can swing by on the 25th?