Notices
2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.
Sponsored by:
Sponsored by:

4.10 gears VS 3.73 gears

Thread Tools
 
Search this Thread
 
Old 06-05-2006, 09:07 AM
  #1  
saud alzaabi
3rd Gear Member
Thread Starter
 
saud alzaabi's Avatar
 
Join Date: Sep 2005
Location:
Posts: 864
Default 4.10 gears VS 3.73 gears

I have been told that the 3.73 gears are for fast take offs and the 4.10 gears are for high speeds ( meaning will increase top speed ) is this true ?

im thinking of getting gears.. i want the best ones that will get me to 200 kph as fast as possible... i dont care about over 200 kph ... i just want to take off fast...

and with this gear ...I know a tune is a must so is it possible to tune the car with a predator tuner ?
saud alzaabi is offline  
Old 06-05-2006, 10:32 AM
  #2  
W1ldcat
3rd Gear Member
 
W1ldcat's Avatar
 
Join Date: Mar 2006
Location:
Posts: 763
Default RE: 4.10 gears VS 3.73 gears

You can get higher top speed with 3.73 and better take off with 4.10. Gears don't effect a tune like intake and exhaust will..
W1ldcat is offline  
Old 06-05-2006, 10:39 AM
  #3  
zx9rpilot
2nd Gear Member
 
zx9rpilot's Avatar
 
Join Date: Nov 2005
Location:
Posts: 224
Default RE: 4.10 gears VS 3.73 gears

The 4.10 will give you faster acceleration with a lower top speed.
The 3.73 will give you slower acceleration with a higher top speed.

The reason a tuner will help is to recalibrate the speedometer for the new gear ratio.

I have the 4.10 and it gets up to speed QUICK. It will grab 2nd and 3rd without even trying.

All smiles with 4.10s!!! [sm=burnout.gif]
zx9rpilot is offline  
Old 06-05-2006, 10:45 AM
  #4  
Timmay!!!
4th Gear Member
 
Timmay!!!'s Avatar
 
Join Date: Apr 2006
Location:
Posts: 1,541
Default RE: 4.10 gears VS 3.73 gears

The way everyone here talks 4.10s are the way to go!! I can't wait to get mine installed! Only time I've heard 3.73s are good are in FI applications. But in an otherwise stock car I've read that 4.10s will give you a higher top speed since the motor doesn't have enough power to max out in top gear due to drag.
Timmay!!! is offline  
Old 06-05-2006, 01:11 PM
  #5  
06GT4RAD
5th Gear Member
 
06GT4RAD's Avatar
 
Join Date: Mar 2006
Location: Nor Cal
Posts: 2,179
Default RE: 4.10 gears VS 3.73 gears

ORIGINAL: Timmay!!!

The way everyone here talks 4.10s are the way to go!! I can't wait to get mine installed! Only time I've heard 3.73s are good are in FI applications. But in an otherwise stock car I've read that 4.10s will give you a higher top speed since the motor doesn't have enough power to max out in top gear due to drag.
4.10's will NOT get you a higher speed in fact they will do the oposite and they will also make your RPM's higher at freeway speeds.

Richard
06GT4RAD is offline  
Old 06-05-2006, 02:11 PM
  #6  
mustangman02232
6th Gear Member
 
mustangman02232's Avatar
 
Join Date: Dec 2004
Location: Ludlow, Mass
Posts: 15,864
Default RE: 4.10 gears VS 3.73 gears


ORIGINAL: 06GT4RAD

ORIGINAL: Timmay!!!

The way everyone here talks 4.10s are the way to go!! I can't wait to get mine installed! Only time I've heard 3.73s are good are in FI applications. But in an otherwise stock car I've read that 4.10s will give you a higher top speed since the motor doesn't have enough power to max out in top gear due to drag.
4.10's will NOT get you a higher speed in fact they will do the oposite and they will also make your RPM's higher at freeway speeds.

Richard
buzz wrong answer, with the T-3650 it will allow you to pull through 5th gear and increase top speed, however if you were in a vacume your top speed would be lower
mustangman02232 is offline  
Old 06-05-2006, 02:21 PM
  #7  
saud alzaabi
3rd Gear Member
Thread Starter
 
saud alzaabi's Avatar
 
Join Date: Sep 2005
Location:
Posts: 864
Default RE: 4.10 gears VS 3.73 gears


ORIGINAL: 06GT4RAD

ORIGINAL: Timmay!!!

The way everyone here talks 4.10s are the way to go!! I can't wait to get mine installed! Only time I've heard 3.73s are good are in FI applications. But in an otherwise stock car I've read that 4.10s will give you a higher top speed since the motor doesn't have enough power to max out in top gear due to drag.
4.10's will NOT get you a higher speed in fact they will do the oposite and they will also make your RPM's higher at freeway speeds.

Richard

which means the fuel efficency will get worse right ? well lets say it had the normal predator performance tune will it be better ?

because my friend is giving away his predator tuner so i might take it until i get my own sct 2 and CAI... and lets say i had the 4.10 gears and the predator performance tune ONLY....

and i raced a stock mustang GT 5spd like mine but completly stock how will the race be ? will i give him a huge BYE BYE? or something more like a cars length ?
saud alzaabi is offline  
Old 06-05-2006, 03:20 PM
  #8  
zx9rpilot
2nd Gear Member
 
zx9rpilot's Avatar
 
Join Date: Nov 2005
Location:
Posts: 224
Default RE: 4.10 gears VS 3.73 gears

Here's what I noticed after the 4.10s.....

After the gears, I spend more time in 5th gear because with the gears and tune, it actually pulls pretty well in 5th gear.

Before the gears, I spent a lot of time in 4th gear at a higher RPM because 5th had no acceleration value.

I would say that my mileage is about the same once everything cancels itself out.
zx9rpilot is offline  
Old 06-05-2006, 04:01 PM
  #9  
mustangman02232
6th Gear Member
 
mustangman02232's Avatar
 
Join Date: Dec 2004
Location: Ludlow, Mass
Posts: 15,864
Default RE: 4.10 gears VS 3.73 gears

your milage will go up a bit in the city and go down a bit on the highway, with the T-3650 i would also recomend you look at 4.30 gears cause they have a very tall 5th gear ratio of .68, you will be at 2900 rpms with 4.30s
mustangman02232 is offline  
Old 06-05-2006, 04:34 PM
  #10  
paco_pony
2nd Gear Member
 
paco_pony's Avatar
 
Join Date: Apr 2006
Location: Dallas, TX
Posts: 245
Default RE: 4.10 gears VS 3.73 gears

i built a simulation model for 05/06 mustang. here's what the 1/4 times and speeds are from the model. I added drag radials to the model to make sure force from gears was getting to the road (that's why stock 1/4 is lower than ~13.5).

3.55: 13.34 sec

3.73: 13.3 sec

4.1 : 13.24 sec

4.3: 13.22 sec



paco_pony is offline  


Quick Reply: 4.10 gears VS 3.73 gears



All times are GMT -5. The time now is 01:49 PM.