awakeinAZ

Do you have the stock drive shaft still on it?

troyclemens

I took approx 20 hrs. I had several other things i needed to do that added to the time, but it is a weekend job. I had to swap underedrive pulleys back to stack, and also i installed delete plates while i was there. Also, doing it alone takes a little while, but the kit is very complete and the directions are good, and of course you can call brenspeed and get them always.

Yes, i do have the stock driveshaft. I am trying to get help with wheels and tires first, then i'll start on the suspension etc. I will probably pull the engine out this winter and go through it so i can run the boost up a little higher.

troyclemens

i will get video, just told my wife, and as soon as i get a day when i can get home before dark, we'll do some video, maybe saturday, but i'll get some.

AMBmustangGT

where do i find this kit on brenspeed?

troyclemens

go to brenspeed.com
click on 05-07 mustangs on the left, then click on turbos/ and superchargers. It will come right up, i bought the polished one

CDW63

How loud is the supercharger whine?

cfr865

Your driving me crazy , I getting one this spring. I'm having them install it, I live about 3.5 hrs. from him. It's nice to hear some postive news about this set-up, all you hear about is KB, Saleen, Whipple ect. Are you going to get a dyno to check rwhp, I'm curious what it's making . I have to wait until all the snow and ice is gone here.

troyclemens

yeah, i probably will, i may even load it in the car trailer and take it to brent next time we go to a car show up that way.

tom281

Yep, Brenspeed rocks; Brent's a cool guy and knows his stuff. I'm looking at the same Paxton kit. I went to the drags with them last fall and saw one of their shop cars ('06 auto) with this kit and no other mods run 12.2.

TASSY5

Isn't a Turbo a better solution for power on an everyday street car.????