Need Help deciding
#1
Need Help deciding
I have a rear blackout panel and I have decided to add black racing stripes. I was thinking either keep the blackout panel and have the stripe end right after the 3rd brake light and just before the panel so that there is a gap or remove the blackout panel and have the stripe run all the way down the back. If anyone has any pics to give me some kind of idea that would be cool. Im leaning towards just removing the blackout panel. I have already received the precut cut stripes from ebay and im going to get it done on friday. Its my last day off until I go to Orlando for 9 days next saturday.
I also just recieved the Eleanor grill with the center mounted fogs and an old school emblem to put on it and Hood pins with lanyards. ill post some pics when im done.
thanks guys!
I also just recieved the Eleanor grill with the center mounted fogs and an old school emblem to put on it and Hood pins with lanyards. ill post some pics when im done.
thanks guys!
#7
RE: Need Help deciding
ORIGINAL: mlcrycc
Here ya go. Take your pick.....
Here ya go. Take your pick.....
#10
RE: Need Help deciding
I would keep the panel, but let the stripes run into it, but not out. Also i would makethe stripes line up with the fogs on your new grill. IMO that woulb be pretty tight. Just my .02 though.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
BeatnikFink
New Member Area
6
10-01-2015 08:00 PM