Hurst shifter Installed
4th Gear Member
Joined: Aug 2004
Posts: 1,615
From: Texas
RE: Hurst shifter Installed
ORIGINAL: Warlok
Compared to the stock shifter its a huge difference. After I got a few thousand miles on mine in my 07 GT it smoothed out a great deal. It is just like cocking the hammer on my Ruger Super Red Hawk 44 mag num. You have no dought your in gear no matter how hard you slam it.
[IMG]local://upfiles/47655/1FA5F83B7FD94E6992602676A5013B91.jpg[/IMG]
Compared to the stock shifter its a huge difference. After I got a few thousand miles on mine in my 07 GT it smoothed out a great deal. It is just like cocking the hammer on my Ruger Super Red Hawk 44 mag num. You have no dought your in gear no matter how hard you slam it.
[IMG]local://upfiles/47655/1FA5F83B7FD94E6992602676A5013B91.jpg[/IMG]
4th Gear Member
Joined: Jan 2006
Posts: 1,042
From: The high country
RE: Hurst shifter Installed
ORIGINAL: Sinister1
I putthe Hurst competition plus short throw shifterin my 07 today and what a difference. I also opted for the switchedT-handleforline locks That I'm going to install later. The install was easy just have a friend there to help guide the stock shifter through from the top and guide the new one back down. That way you don't have the drop the drive shaft.
Tools needed:
Floor jack
Jack stands
10mm deep well
13mm socket
10mm wrench
12" Longextension
7/32 Allen wrench
[IMG]local://upfiles/64424/6C7AADF7005043FABDD6F10D8931A71F.jpg[/IMG]
I putthe Hurst competition plus short throw shifterin my 07 today and what a difference. I also opted for the switchedT-handleforline locks That I'm going to install later. The install was easy just have a friend there to help guide the stock shifter through from the top and guide the new one back down. That way you don't have the drop the drive shaft.
Tools needed:
Floor jack
Jack stands
10mm deep well
13mm socket
10mm wrench
12" Longextension
7/32 Allen wrench
[IMG]local://upfiles/64424/6C7AADF7005043FABDD6F10D8931A71F.jpg[/IMG]
3rd Gear Member
Joined: Apr 2007
Posts: 763
From: Pa
RE: Hurst shifter Installed
ORIGINAL: svt93style
Sorry to hijack the post but do you have to have the handle exposed with the husrt?
Or can you remain the stock look, with it inside the boot?
Sorry to hijack the post but do you have to have the handle exposed with the husrt?
Or can you remain the stock look, with it inside the boot?
5th Gear Member
Joined: Jun 2006
Posts: 3,095
From: Long Island, NY
RE: Hurst shifter Installed
http://www.fordmuscle.com/archives/2.../HurstShifter/
found this a while back on installing the hurst. Just thought I'd pass it on. Maybe help someone out
found this a while back on installing the hurst. Just thought I'd pass it on. Maybe help someone out
Thread
Thread Starter
Forum
Replies
Last Post
