People running the 295/45/18's & 255/45/18's combo
08-19-2007, 02:19 PM
#5
5th Gear Member
Join Date: May 2005
Location: Tampa
Posts: 4,204
RE: People running the 295/45/18's & 255/45/18's combo
Good point... I forgot he has 45s in the rear. I will measure my gap tonight when I get home and let ya know if you have room for the 45's. I think I posted in the other thread your tiring being like 1.5" taller than mine...
08-19-2007, 02:29 PM
#7
4th Gear Member
Thread Starter
Join Date: May 2006
Location: Norfolk, VA
Posts: 1,412
RE: People running the 295/45/18's & 255/45/18's combo
ORIGINAL: tungstenstang
steeda springs are best for that setup. about a 1 inch drop all-round.
steeda springs are best for that setup. about a 1 inch drop all-round.
08-19-2007, 03:08 PM
#8
4th Gear Member
Join Date: Jun 2006
Posts: 1,260
RE: People running the 295/45/18's & 255/45/18's combo
ORIGINAL: howarmat
You will rub with that setup you have in the back i would think. You can lower it an alittle but not much
You will rub with that setup you have in the back i would think. You can lower it an alittle but not much
I wouldn't go any lower then that though.
08-19-2007, 03:40 PM
#10
4th Gear Member
Thread Starter
Join Date: May 2006
Location: Norfolk, VA
Posts: 1,412
RE: People running the 295/45/18's & 255/45/18's combo
ORIGINAL: howarmat
a 295/45 rear.....i sure as cant think of many....most runa 35-40 profile
a 295/45 rear.....i sure as cant think of many....most runa 35-40 profile