Your Transformation
Thread Starter
5th Gear Member
Joined: Nov 2006
Posts: 4,132
From: California
Your Transformation
A close friend of mine and I were talking and he says that he is looking into getting a new GT. He says that alot of you all here have some nice rides but is curious to what you all have done to achieve the look & power that you have. The sigs don't say too much in his opinion -- So I thought I would ask you all to list all your mods to include HP adders and appearance -- (no matter how minor the mod is) ... your HP numbers followed by a pic of your stang as it sits now after all the work you have done to it. Thanks in advance! ~ J
4th Gear Member
Joined: May 2007
Posts: 1,373
From: West Melbourne, FL
RE: Your Transformation
I'll chime in, here's the mods:
Roush UDP's
Pacesetter Shorty Headers
Hurst Short Shifter
Pypes X-Pipe (with hiflows)
Pypes Violator Axle-back
JLT CAI
Tokico D-Specs
Dropzone Lowering Springs (-2in)
Strut Bar
Diablo Predator
4:10's
Classic Chin Spoiler
1/4 Louvers
New additions: (no pictures yet)
3 Peice Ducktail Spoiler
Last Gen Black Saleen Wheels 18x9/10
Roush 1/4 Louvers
GT-CS Side Scoops
Street Scene Rear Valance
Before:
After:
303whp 317wtq
Roush UDP's
Pacesetter Shorty Headers
Hurst Short Shifter
Pypes X-Pipe (with hiflows)
Pypes Violator Axle-back
JLT CAI
Tokico D-Specs
Dropzone Lowering Springs (-2in)
Strut Bar
Diablo Predator
4:10's
Classic Chin Spoiler
1/4 Louvers
New additions: (no pictures yet)
3 Peice Ducktail Spoiler
Last Gen Black Saleen Wheels 18x9/10
Roush 1/4 Louvers
GT-CS Side Scoops
Street Scene Rear Valance
Before:
After:
303whp 317wtq
3rd Gear Member
Joined: Nov 2006
Posts: 960
From: Kansas City
RE: Your Transformation
I havent done alot to it cause I like the sleeper effect.
The hood, rear spoiler, center panel, and front spoiler (not in pic) arePAINTED flat black.
Also added a Magnaflow 3" exhaust, BBK shorty headers, ssb brake lines, front and rear strut braces, and finally the 10psi HO ProCharger. I may get some rear lower and upper control arms, but that would be about it. I already have a stiff, lowered, go kart type Datsun Z that is getting a 383 SBC right now. I dont want/need to make the Stang the same way.
The hood, rear spoiler, center panel, and front spoiler (not in pic) arePAINTED flat black.
Also added a Magnaflow 3" exhaust, BBK shorty headers, ssb brake lines, front and rear strut braces, and finally the 10psi HO ProCharger. I may get some rear lower and upper control arms, but that would be about it. I already have a stiff, lowered, go kart type Datsun Z that is getting a 383 SBC right now. I dont want/need to make the Stang the same way.
1st Gear Member
Joined: Sep 2007
Posts: 137
From:
RE: Your Transformation
2007mustang gtwith only 11k miles... FRPP 4.10 gears, Eibach Prokit, Diablosport tuner, BBK TB, C&L CAI, Bassani X Pipe, Bassani Mufflers, and 20in Shelby Razor wheels with nitto555 tires,d1sc procharger upgraded 3core intercooler, 60lbs injectors, the mafia MAF, Msd Boost a pump, dual gt fuel pumps,2step colder spark plugs, coil packs, jpc polished fuel rails, cobalt gauges (boost/vacuum, fuel pressure, wideband air/fuel), SSfighter 3600-3800 torque converter, trans cooler, 302stroker kit from RGR, Custom ground camshafts as per RGR specs, RGR custom valve springs and containers, head gaskets, oil pump, modular oil pan gasket future mods include fogger system and a beefed up tranny....est rwhp 620-670 (getting dynod sometime this month)
Thread Starter
5th Gear Member
Joined: Nov 2006
Posts: 4,132
From: California
RE: Your Transformation
oh thats it -- 
. You have any pics? You'll def have to share your dyno once it's done
. You have any pics? You'll def have to share your dyno once it's done
ORIGINAL: Stangbanger3v
2007mustang gtwith only 11k miles... FRPP 4.10 gears, Eibach Prokit, Diablosport tuner, BBK TB, C&L CAI, Bassani X Pipe, Bassani Mufflers, and 20in Shelby Razor wheels with nitto555 tires,d1sc procharger upgraded 3core intercooler, 60lbs injectors, the mafia MAF, Msd Boost a pump, dual gt fuel pumps,2step colder spark plugs, coil packs, jpc polished fuel rails, cobalt gauges (boost/vacuum, fuel pressure, wideband air/fuel), SSfighter 3600-3800 torque converter, trans cooler, 302stroker kit from RGR, Custom ground camshafts as per RGR specs, RGR custom valve springs and containers, head gaskets, oil pump, modular oil pan gasket future mods include fogger system and a beefed up tranny....est rwhp 620-670 (getting dynod sometime this month)
2007mustang gtwith only 11k miles... FRPP 4.10 gears, Eibach Prokit, Diablosport tuner, BBK TB, C&L CAI, Bassani X Pipe, Bassani Mufflers, and 20in Shelby Razor wheels with nitto555 tires,d1sc procharger upgraded 3core intercooler, 60lbs injectors, the mafia MAF, Msd Boost a pump, dual gt fuel pumps,2step colder spark plugs, coil packs, jpc polished fuel rails, cobalt gauges (boost/vacuum, fuel pressure, wideband air/fuel), SSfighter 3600-3800 torque converter, trans cooler, 302stroker kit from RGR, Custom ground camshafts as per RGR specs, RGR custom valve springs and containers, head gaskets, oil pump, modular oil pan gasket future mods include fogger system and a beefed up tranny....est rwhp 620-670 (getting dynod sometime this month)
Thread Starter
5th Gear Member
Joined: Nov 2006
Posts: 4,132
From: California
RE: Your Transformation
The only part of the Cervinis kit that doesn't work when lowered is the side exhaust. I only have the hood though
ORIGINAL: Stangbanger3v
i will... hey caution will that cervinis kit still work if the cars already lowered
i will... hey caution will that cervinis kit still work if the cars already lowered
5th Gear Member
Joined: Nov 2007
Posts: 3,465
From: Dfw/Austin, TX