$2000 installed
Thread Starter
5th Gear Member
Joined: May 2006
Posts: 4,182
From: Tennessee
RE: $2000 installed
I'm torn with this one... I'll probably wait a while and see if his rates change. I do want the cadillac setup though and that's why its so high. bottle opener, purge kit. window switch.. all for the 2k. I'm torn on a blower because I thing the better one's are coming in a few years so by thenI'll have a built motor ready for a blower
ORIGINAL: ChiDiddy
hey blueherd are you doing to go with that guy you got off the phone? 2k is way too much. Might as well save a little more and get an SC.
hey blueherd are you doing to go with that guy you got off the phone? 2k is way too much. Might as well save a little more and get an SC.
3rd Gear Member
Joined: Jun 2007
Posts: 890
From: Danville, VA
RE: $2000 installed
Not a bad price. I paid a little over $1,000 for my Zex kit & racers kit. Then HT0 plugs --$100, I did all of the install myself, and dyno tuning run me a little over $350(already had XCAL II)----So that's a little over $1450. If you consider its $550 installation--its not a terrible price. I would consider going with the Zex traction control device over a window switch tho---its programmable to select which gears you spray in, as well as RPM.
Thread Starter
5th Gear Member
Joined: May 2006
Posts: 4,182
From: Tennessee
RE: $2000 installed
Hmmm how long did it take you? I'm considering this and just paying them for a dyno tune...
ORIGINAL: D_Gusler
Not a bad price. I paid a little over $1,000 for my Zex kit & racers kit. Then HT0 plugs --$100, I did all of the install myself, and dyno tuning run me a little over $350(already had XCAL II)----So that's a little over $1450. If you consider its $550 installation--its not a terrible price. I would consider going with the Zex traction control device over a window switch tho---its programmable to select which gears you spray in, as well as RPM.
Not a bad price. I paid a little over $1,000 for my Zex kit & racers kit. Then HT0 plugs --$100, I did all of the install myself, and dyno tuning run me a little over $350(already had XCAL II)----So that's a little over $1450. If you consider its $550 installation--its not a terrible price. I would consider going with the Zex traction control device over a window switch tho---its programmable to select which gears you spray in, as well as RPM.
2nd Gear Member
Joined: Aug 2006
Posts: 215
From: Wisconsin
RE: $2000 installed
i think it is a bit to high myself, but then again i did my own install and i was surprised at how easy it was. it did take me a while though but that was due to taking lots of smoke and beer breaks
but if you are focused on it, it should only take you 3-4 hours. if you do decide to do it your self and need some tips just shoot me a message.
but if you are focused on it, it should only take you 3-4 hours. if you do decide to do it your self and need some tips just shoot me a message.