2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.

Help with gears

Thread Tools
 
Search this Thread
 
Old Jan 29, 2008 | 08:17 PM
  #1  
hecktic33gt's Avatar
hecktic33gt
Thread Starter
1st Gear Member
 
Joined: May 2007
Posts: 75
From:
Default Help with gears

Hey everyone. I'm looking to install 4.10 FRPP gears in my automatic 05 gt next week and people are telling me not too cuz u lose a lot of top end. To anyone who has 4.10 gears was it worth the money and is ure top end still good when racing?

Any help is appreciated. Thanks.
Old Jan 29, 2008 | 08:21 PM
  #2  
06Redfire3V's Avatar
06Redfire3V
5th Gear Member
 
Joined: Feb 2007
Posts: 2,498
From: Oklahoma
Default RE: Help with gears

I have FRPP 4.10s i absolutely love them, best mod - that and cai+tune.

You will lose some top end but not alot. I still can probably hit 140
Old Jan 29, 2008 | 08:22 PM
  #3  
MIKE562's Avatar
MIKE562
2nd Gear Member
 
Joined: Nov 2006
Posts: 358
From:
Default RE: Help with gears


ORIGINAL: 06Redfire3V

I have FRPP 4.10s i absolutely love them, best mod - that and cai+tune.

You will lose some top end but not alot. I still can probably hit 140
But is your car a manual or auto?
Old Jan 29, 2008 | 08:46 PM
  #4  
281GT's Avatar
281GT
3rd Gear Member
 
Joined: Mar 2005
Posts: 864
From:
Default RE: Help with gears

Keep in mind that the O.D. ratio in the auto is different than the manual.
O.D. ratio for the auto is 0.71:1
O.D. ratio for the manual is 0.68:1
It's not as "tall" so assuming the same size tires a manual S197 with 4.10s will turn just about the same rpms in 5th as the auto would with 3.90 gears.
It depends on how fast you like to drive on the freeway. Still I wouldn't hesitate to use the 4.10s with the auto. I did some math for you.
Assuming a 27.1" diameter tire and 4.10 gears...
The auto at 2200 rpm you'll be doing 61.11 mph
The manual at 2200 rpm you'll be doing 64.27 mph
You should also consider a higher stall speed converter. It makes a huge difference in your launch.
Old Jan 29, 2008 | 08:48 PM
  #5  
probinator's Avatar
probinator
3rd Gear Member
 
Joined: Nov 2006
Posts: 914
From:
Default RE: Help with gears

get the 4:10's best mod next to doing the intake and tune.
Old Jan 29, 2008 | 09:38 PM
  #6  
white07's Avatar
white07
4th Gear Member
 
Joined: Apr 2007
Posts: 1,602
From:
Default RE: Help with gears

I havent lanuched at the track or with my sticky tires yet but I dont feel THAT much difference between the 3.55s and 4.10s. I did lose worse to a T/A with the 4.10s than I did with the 3.55s cause I went sideways in first and then second while he was hooking and booking.

But anyways my 4.10s were free (gift), my gear install kit was free (ex-gf gift), and my buddy who is a ford tech installed them for free (he is like my brother basically). $500 job for free eh ill take that
Old Jan 29, 2008 | 09:59 PM
  #7  
Boozshey's Avatar
Boozshey
5th Gear Member
 
Joined: May 2005
Posts: 4,204
From: Tampa
Default RE: Help with gears

I think it's funny when people say "I will lose a lot of top end." How fast are you looking to go... Seriously, you can either beat someone to the next light or beat someone to the next state. I chose next light and got 4.10's.
Old Jan 29, 2008 | 10:02 PM
  #8  
hecktic33gt's Avatar
hecktic33gt
Thread Starter
1st Gear Member
 
Joined: May 2007
Posts: 75
From:
Default RE: Help with gears

Thanks a lot guys for your input!!!!! =)
Old Jan 29, 2008 | 10:33 PM
  #9  
06Redfire3V's Avatar
06Redfire3V
5th Gear Member
 
Joined: Feb 2007
Posts: 2,498
From: Oklahoma
Default RE: Help with gears

ORIGINAL: MIKE562


ORIGINAL: 06Redfire3V

I have FRPP 4.10s i absolutely love them, best mod - that and cai+tune.

You will lose some top end but not alot. I still can probably hit 140
But is your car a manual or auto?
Manual
Old Jan 29, 2008 | 11:53 PM
  #10  
Wally39's Avatar
Wally39
4th Gear Member
 
Joined: Mar 2006
Posts: 1,547
From:
Default RE: Help with gears

I have 4.10's in my auto and love'em. They knocked 4 tenths off my 1/4 mile.



All times are GMT -5. The time now is 12:51 PM.