StangMan001

I put the '66 ones on...

1morepart

these look good
http://www.americanmuscle.com/46-hig...mblem-red.html

SANANTONIO06GT

I wouldnt replace the GT badges with anything that says "4.6 SOHC" because, correct me if Im wrong,our mustangs dont have single over head cams

SANANTONIO06GT

Never mind my last...it is SOHC....

Joolander

yes, they do

and please don't type in all bold

black S197

copy cat.



[IMG]local://upfiles/50298/C58E86F984D140A7AF6635345A02BA28.jpg[/IMG]

Joolander

here found a pic of the badge I was talking about. I realize its on an Explorer, but I think it could look good

StangMan001

I liked them so much I had to have them aslo

mrwglo

[/quote]

Does anyone have a link where I can find this one? I'd like it for the rear panel to the left or the right side taillight, or maybebelow the GT (depends on how busy it looks) Can't find it onlineanywhere!

05Retro

I don't have the Powered by Ford on my car but before I mounted it to the dash I placed it under the GT emblem and thought they would look good thereeither leaving the GT emblem above it or evenby itself.The one thing that's nice about them is they stand out because of the different colors.The Powered byFord emblems are made by Scott Drake and can be bought at partscheap.com. I also have the 4.6 High Performance on my trunk and engine cover.I would also suggest to make sure the mounting surfaceand emblem contour does not have alot of curve to it so it mounts as flush to the surface as possible. Most of these emblems are mounted with 3Mtape, you want them to hold.

[IMG]local://upfiles/13839/B3E7D7647DF747C593A062CCA20FEE83.jpg[/IMG]

[IMG]local://upfiles/13839/44B060772E844B0D984257491C53FAE8.jpg[/IMG]

[IMG]local://upfiles/13839/976678387706400A91FCAD12FDE5D2C6.jpg[/IMG]