Replacing GT Emblems...Suggestions ?
1st Gear Member
Joined: Mar 2008
Posts: 58
RE: Replacing GT Emblems...Suggestions ?
ORIGINAL: 05Retro
I don't have the Powered by Ford on my car but before I mounted it to the dash I placed it under the GT emblem and thought they would look good thereeither leaving the GT emblem above it or evenby itself.The one thing that's nice about them is they stand out because of the different colors.The Powered byFord emblems are made by Scott Drake and can be bought at partscheap.com. I also have the 4.6 High Performance on my trunk and engine cover.I would also suggest to make sure the mounting surfaceand emblem contour does not have alot of curve to it so it mounts as flush to the surface as possible. Most of these emblems are mounted with 3Mtape, you want them to hold.
[IMG]local://upfiles/13839/B3E7D7647DF747C593A062CCA20FEE83.jpg[/IMG]
I don't have the Powered by Ford on my car but before I mounted it to the dash I placed it under the GT emblem and thought they would look good thereeither leaving the GT emblem above it or evenby itself.The one thing that's nice about them is they stand out because of the different colors.The Powered byFord emblems are made by Scott Drake and can be bought at partscheap.com. I also have the 4.6 High Performance on my trunk and engine cover.I would also suggest to make sure the mounting surfaceand emblem contour does not have alot of curve to it so it mounts as flush to the surface as possible. Most of these emblems are mounted with 3Mtape, you want them to hold.
[IMG]local://upfiles/13839/B3E7D7647DF747C593A062CCA20FEE83.jpg[/IMG]
3rd Gear Member
Joined: Mar 2005
Posts: 544
From:
RE: Replacing GT Emblems...Suggestions ?
Go to partscheap.com andclick on the Scott Drake section it is the first item listed.
ORIGINAL: mrwglo
retro, where did you get the Powered By Ford emblem? I still can't find it anywhere online.
ORIGINAL: 05Retro
I don't have the Powered by Ford on my car but before I mounted it to the dash I placed it under the GT emblem and thought they would look good thereeither leaving the GT emblem above it or evenby itself.The one thing that's nice about them is they stand out because of the different colors.The Powered byFord emblems are made by Scott Drake and can be bought at partscheap.com. I also have the 4.6 High Performance on my trunk and engine cover.I would also suggest to make sure the mounting surfaceand emblem contour does not have alot of curve to it so it mounts as flush to the surface as possible. Most of these emblems are mounted with 3Mtape, you want them to hold.
[IMG]local://upfiles/13839/B3E7D7647DF747C593A062CCA20FEE83.jpg[/IMG]
I don't have the Powered by Ford on my car but before I mounted it to the dash I placed it under the GT emblem and thought they would look good thereeither leaving the GT emblem above it or evenby itself.The one thing that's nice about them is they stand out because of the different colors.The Powered byFord emblems are made by Scott Drake and can be bought at partscheap.com. I also have the 4.6 High Performance on my trunk and engine cover.I would also suggest to make sure the mounting surfaceand emblem contour does not have alot of curve to it so it mounts as flush to the surface as possible. Most of these emblems are mounted with 3Mtape, you want them to hold.
[IMG]local://upfiles/13839/B3E7D7647DF747C593A062CCA20FEE83.jpg[/IMG]
2nd Gear Member
Joined: Nov 2006
Posts: 191
From: Long Island
RE: Replacing GT Emblems...Suggestions ?
I liked the 65 and 66 GT emblems that some of you have....but I found them to be really small. You have to be almost on top of it to even discern what they say...
Thats why I got the 67 GTA in my sig...bigger and I have an automatic!
Thats why I got the 67 GTA in my sig...bigger and I have an automatic!
Thread
Thread Starter
Forum
Replies
Last Post
