brendend

goods great. im about to pick up some black rims

loots06

Looks good, but still missing something. Stripes maybe..black..

jrhykushi

i think ill have to agree, it looks good, but kinda odd cuz the black comes out of nowhere.
i think a black out panel will also look good

AtHomeTech

I put on the Summit Racing springs. I did the Granatelli camber kit, I recoment getting something else for camber as these score really easily and its hard to get the camber nut to sit flat.

AtHomeTech

I was thinking the same thing.. Better pics and write up soon...

cal66

I just got my GT-H convertible today. I think your foose set is perfect. I have been seriously looking at the Razor set but I want the 10" rear rims but they are't available. I have been thinking very seriously about Black Foose Nitrous wheelsfor my car but would like some feed back from you about fitting, whether bigger brakes are a problem with these wheels and why did you go with 295/30/20 in the rear rather than 295/35/20? Did youinstall the wheels with spacers or offsets? How does it ride compared to the 18 inch wheels? Thanks Any helpful response appreciated.

AtHomeTech

Lets see if I can help. First, no way a big brake kit will fit, its close with the stock ones. I went with 295/30s because they are the right height and match up with the 255/35s in the front in sidewall height. Also these Toyos dont have a 295/35 as far as I know. I did not use any spacers, these are36mm in front and 45mm in the back (not totally sure but thats what I think I read). As for the ride, it has suffered. The combination of the springs and the 20's has made it quite a bit harsher. I'll happily trade the harsher ride for the new agressive stance though. Its not real bad but if I had to put a number on it i'd I'd say 25% worse. I hope this helps.

-Ken