billyjo

Well i have used cleaner before and sprayed and cleaned but today my ideal was sucking and when i pushed the clutch in it down to 250 rpms and stalled when i had the ac on. So today i was cleaning and i pushed the blade open to clean and notice right behing the blades it was crusted with black crap that the spray wasn't cleaning so i soaked a towel and cleaned it and holy sh#$ ideal is back and no problem at all. DID wonders so you guys who clean, open the blades and physically clean behind them and it will make a incredible difference. Thanks for reading

5SPD07GT

how many miles on you car? and btw it idle , you had me all confused

billyjo

my car has 71000 miles on it and sorry if it was confusing when i pushed the clutch in to shift or down shift the rpms went to 250 real low and at ideal it was going up and down hope that clears it up

5SPD07GT

i understand. Your word ideal is actually spelled idle

billyjo

whoops well its spelled write oh i mean wright no uuhhh right thats it

mlcrycc

Very sound advice on the cleaning. This is what mine looked like at about 15K.....

Mike




[IMG]local://upfiles/13557/939C6937BC7E47ED8047015335A99E48.jpg[/IMG]

[IMG]local://upfiles/13557/1F3486BDF6E04AB4B735D22E8FFA467B.jpg[/IMG]

tungstenstang

anyone have some how to's on this. i dont want to screw it up. [&:]

SatinSilverStang

take off air intake
take finger, push on butterfly valve in TB
spray cleaner, wipe with rag
put back together

tungstenstang

thanks a million,

what kind of cleaner do you use?

sailing220

Throttle body/Air intake cleaner.