Hello people!
This is for only the 4.0/V6 vortech owners w/intercooler-aftercooler.

I was looking over the vortech system under the hood, wires,plugs,hoses, etc.
And I notice that the alternator pulley was rubbing on the side of the charge-cooler, the one thats up top in the engine bay, not the one by the bumper.

So the installer and I came up with an idea to make a brace/spacer for this little thing that could of made one big problem down the road.

A guy with a corvette had the same problem and didn't checked it and the atl. pulley had cut a hole into the charge-cooler.

Here's a shot of the area.

 

on the V6 only I guess