2-step Launch Control
#14
#15
line lock would be tight, and 2step is easy if you have a tuner, specifically a SCT
i tune mine myself so i can mess with everything, there are two rev limiters in the tuner and you just set the neutral rev limiter to whatever you wish to launch at. i myself launch at 3800 rpm
and the way i launch is once i stage the car i put just enough throttle to get the rpm to the rev limiter to where it is bouncing off the limiter slightly, just barely hitting, you dont want it bouncing hella hard off the limiter, impossible to consistently launch at same rpm
i tune mine myself so i can mess with everything, there are two rev limiters in the tuner and you just set the neutral rev limiter to whatever you wish to launch at. i myself launch at 3800 rpm
and the way i launch is once i stage the car i put just enough throttle to get the rpm to the rev limiter to where it is bouncing off the limiter slightly, just barely hitting, you dont want it bouncing hella hard off the limiter, impossible to consistently launch at same rpm
#18
The tuning option for 2 steps doesn't seem to work as well. I'm not sure how it works, but I would rather cut spark than fuel. Not sur eif the tuners ahve the option to do either very well.
Eagle I sent you a PM on the MSD Launch Master.
The line locks are pretty easy too. Sactown and I did both are cars and we took 2-3 hours on the first one and only anhour on the second one. I will give hints for whoever needs them.
I got the SLP single solanoid kit. Works fine.
Eagle I sent you a PM on the MSD Launch Master.
The line locks are pretty easy too. Sactown and I did both are cars and we took 2-3 hours on the first one and only anhour on the second one. I will give hints for whoever needs them.
I got the SLP single solanoid kit. Works fine.
Thread
Thread Starter
Forum
Replies
Last Post
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM