Shaker 500 audio noise
#32
#33
Shaker 500 audio noise
A non nav Shaker 500 identification code:
Radio on and put the radio on an AM or FM channel.
Press 3 and 6 simultaneously.
Before it stops testing the speakers press 6.
Then press the UP button and you see the reference code.
I have: AR3T - 19C 158 - AL
That is apparently a Job1 ACM code. A Job2 ACM will probably have a different code, possibly the "AL" will change.
Whoever gets a Job2 ACM may be able to identify a "before and after" code change.
Tomz
Radio on and put the radio on an AM or FM channel.
Press 3 and 6 simultaneously.
Before it stops testing the speakers press 6.
Then press the UP button and you see the reference code.
I have: AR3T - 19C 158 - AL
That is apparently a Job1 ACM code. A Job2 ACM will probably have a different code, possibly the "AL" will change.
Whoever gets a Job2 ACM may be able to identify a "before and after" code change.
Tomz
#35
A non nav Shaker 500 identification code:
Radio on and put the radio on an AM or FM channel.
Press 3 and 6 simultaneously.
Before it stops testing the speakers press 6.
Then press the UP button and you see the reference code.
I have: AR3T - 19C 158 - AL
That is apparently a Job1 ACM code. A Job2 ACM will probably have a different code, possibly the "AL" will change.
Whoever gets a Job2 ACM may be able to identify a "before and after" code change.
Tomz
Radio on and put the radio on an AM or FM channel.
Press 3 and 6 simultaneously.
Before it stops testing the speakers press 6.
Then press the UP button and you see the reference code.
I have: AR3T - 19C 158 - AL
That is apparently a Job1 ACM code. A Job2 ACM will probably have a different code, possibly the "AL" will change.
Whoever gets a Job2 ACM may be able to identify a "before and after" code change.
Tomz
FYI, mine is also AR3T-19C 158-AL. If this number is on the outside of the ACM we will easily know what we are dealing with.
Last edited by Adam; 07-27-2009 at 08:06 PM.
#39
#40