Dyno Numbers
#1
Dyno Numbers
We finally got a shop in the area with a dynojet. I made three pulls and here are the results"
1. Max Power=293.15 Max Torque=306.38 Run Conditions: 84.26 F, 29.92 in-Hg, Humidity: 73%, SAE: 1.02
2. Max Power=294.62 Max Torque=310.00 Run Conditions: 85.75 F, 29.94 in-Hg, Humidity: 69%, SAE: 1.02
3. Max Power=294.45 Max Torque=308.37 Run Conditions: 84.46 F, 29.94 in-Hg, Humidity: 72%, SAE: 1.02
1. Max Power=293.15 Max Torque=306.38 Run Conditions: 84.26 F, 29.92 in-Hg, Humidity: 73%, SAE: 1.02
2. Max Power=294.62 Max Torque=310.00 Run Conditions: 85.75 F, 29.94 in-Hg, Humidity: 69%, SAE: 1.02
3. Max Power=294.45 Max Torque=308.37 Run Conditions: 84.46 F, 29.94 in-Hg, Humidity: 72%, SAE: 1.02
#2
not bad numbers but honestly sounds a little low to me. With JBA headers, O/R H-pipe, exhaust, 80mm Steeda CAI, and U/D pulleys i made 314HP/333TQ.
I think if you got a dyno tune, you should get over 300HP
I think if you got a dyno tune, you should get over 300HP
#4
6th Gear Member
Nice spread between the pulls. Those numbers look reasonable to me for the performance mods you list. It really depends on where you were stock. We've seen some variance on the forum for bone stockers ranging pretty much from the 250's to the 270's. You also need to consider all the variables.
Thread
Thread Starter
Forum
Replies
Last Post
Galactic
Archive - Mustangs For Sale
10
04-29-2019 02:56 PM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
0
09-23-2015 01:28 PM