Every time i reload the Bamachips tune I always throw these 2 codes
P0133
P1000

And it only happens when its cold outside. Ive run three differnt tunes on the car ( The C&L tunes that came in my Racer package) and NO CODES, but i run this one and if the car dosnt warm up for at least 10 min i throw these codes after about 2 min of driving. Is there any reason for this ? I love this tune ( Bama 91oct. Race tune) and really would hate to have to go back to the others. I have the Diablo tuner in my car 24/7 so clearing them is not a problem just a pain in the ***.

 

NO one else ever have these codes with there tune ..??

 

I will sometimes get codes when I load in a different bama tune. I don't remember the alpha and numeric numbers, but it's usually bank 1 and bank 2 lean and system or something not ready. Clearing the codes takes care of the problem and I will check it periodically with the diablo.

 

Could it be the delay in the in the O2 sensor warm up cycle? Tell them to put a couple more seconds I think they go in 15 second or 30 second intervals.

 

Oh really ! Were in the setup is that located ..???

 

I am not sure if the SCT can adjust on the fly with that. I am not familiar with this tuning stuff, but that is something the custom tuner had to do with mine, for a different reason, but sounds like it could be the fix. Talk to Bama and see what they say.

 

damn.. see i have the Diablo tuner! F**K I need to just bite the bullet and get a SCT and be dont with it ! LOL

 

Just email Doug for a revision in your tune and call it a day.